-
E-mail
848186302@qq.com
-
Phone
15639761399
-
Address
No. 182 Industrial Road, Shangjie District, Zhengzhou City
Zhengzhou Huachen Instrument Co., Ltd
FY-50L Glass Liquid Distributor User Guide
Date: 2025-09-10Read: 5
The FY-50L glass splitter is a widely used equipment in the fields of biopharmaceuticals, chemical laboratories, etc. It is mainly used for solid-liquid extraction and can also be used for reactions at room temperature. The device is made of GG17 high borosilicate glass material, which has excellent chemical and physical properties. Its electric constant speed stirring system can evenly stir the raw materials inside the kettle, allowing the materials to fully react inside the kettle. After the reaction is complete, turn off the stirring system and wait for the material to clear and separate into layers. Then, use the glass discharge valve to discharge the liquid layer by layer.
1、 Operation steps
1. Preparation work: Check if all components of the equipment are intact and ensure that the glass separator is clean and dry. Connect the power supply and vacuum pump (if any).
2. Add materials: Add the materials that need to be separated into liquid into the glass separator through the feeding port, taking care not to exceed the maximum capacity of the equipment.
3. Start mixing: Turn on the electric mixing system and adjust the mixing speed according to the properties of the material and experimental requirements. The mixing speed should gradually increase from low speed to the desired speed to avoid material splashing.
4. Reaction process: During the stirring process, observe the reaction of the material. If necessary, a vacuum pump can be connected for pressure reduction operation to accelerate the reaction rate or improve the separation efficiency.
5. Stratification and liquid release: After the reaction is complete, turn off the stirring system and allow the material to naturally clarify and stratify. Release different liquid layers layer by layer through the glass discharge valve, and be careful to operate slowly to avoid liquid mixing.
6. Cleaning and maintenance: After use, clean the glass separator in a timely manner to remove residual materials. Regularly check the sealing of the equipment and the lubrication of the mixing system to ensure the normal operation of the equipment.
2、 Operation skills
-Temperature control: For reactions that require specific temperatures, the glass separator can be temperature controlled through external heating or cooling devices.
-Vacuum operation: When performing vacuum operation, attention should be paid to controlling the vacuum degree to avoid material splashing or equipment damage caused by excessive vacuum degree.
-Uniform stirring: During the stirring process, it is necessary to ensure that the materials are fully mixed in the kettle to improve reaction efficiency and separation effect.
3、 Precautions
-Safe operation: During the operation process, it is necessary to strictly follow the safety operation regulations, wear protective gloves and goggles, and avoid contact with harmful substances.
-Equipment maintenance: Regularly maintain and upkeep the equipment, check the wear and tear of each component, and replace damaged parts in a timely manner.
-Avoid overload: Do not exceed the maximum capacity and maximum speed of the equipment to avoid damage.
Through the above user guide and operation skills, users can better use the FY-50L glass separator, improve experimental efficiency and safety. In practical operation, it is necessary to flexibly adjust the operating steps and parameters according to specific experimental requirements and material properties to achieve the best experimental results.