5BG Off Site Sterilization Magnetic Stirring Glass Fermentation Tank

5BG Off Site Sterilization Magnetic Stirring Glass Fermentation TankIndicators and configurations:

Nominal volume: 0.5/1/2/3/5/7/10 liters (optional)

Diameter to height ratio: 1:2 (adjustable); Liquid filling coefficient: 70%

Tank system: The tank cover and bottom are made of high-quality SUS316L stainless steel, and the tank body is made of high-temperature resistant borosilicate glass with a liquid filling coefficient of 70%. The process structure is advanced and the operation is simple.

Mixing system: Adopting an upper suspension strong magnetic mixing system, there is no mechanical seal that is not easy to leak, and there is no top pin at the bottom. High quality aluminum alloy motors and imported speed controllers are used to ensure stable speed; High performance mixing blades, defoaming blades, and stepless speed regulation. All the components inside the tank are installed on the tank cover, making maintenance and cleaning very convenient; Fermentation standard paddle, with adjustable blade height, can also be replaced with different types of stirring paddles according to the special requirements of the fermentation process. The design of separating the motor from the tank greatly reduces the weight of the tank, makes operation easier and more convenient, and saves a lot of manpower. The magnetic stirring system adopts special permanent magnet materials and processing technology, without demagnetization. The stirring speed will not be lower than 980rpm during the service life of the fermentation tank, and can also achieve high speed in high viscosity media. The fully automatic setting control range is 50~1000rpm ± 5rpm.

Ventilation control: manual control, flow meter display. Including rotor flowmeter, imported filter membrane air sterilization filter, with a filtration accuracy of up to 0.02 μ m

5BG Off Site Sterilization Magnetic Stirring Glass Fermentation TankTemperature control: jacketed water bath electric heating, automatic control, temperature control cooling water temperature+5 ℃~65 ℃ ± 0.2 ℃

Foam control: full automatic PID control and alarm, peristaltic pump automatically adds defoamer

Feeding control: PID fully automatic setting peristaltic pump switch control, automatic flow addition and metering.

PH control: Using Swiss Mettler electrodes (compatible with high-quality domestic electrodes), the peristaltic pump automatically adds acid and alkali, accurately controls pH, display range: 0.00~14.00 ± 0.01, fully automatic control range: 2.00~12.00 ± 0.05

DO control: using Swiss Mettler electrodes (compatible with high-quality domestic electrodes), associated with speed (optional air flow, feeding, etc.) for control, 0-150 ± 3%, display accuracy of 0.1%

Pressure control: manual control (automatic control optional), instrument display

Control system: Single tank can use BIOTECH-7000 biological process controller supplemented with BIOTECH-FCS fermentation monitoring software, which allows you to observe fermentation changes on-site and remotely monitor the fermentation process; If multiple or multi-stage fermentation tanks are used, BIOTECH-3000/6000/8000/9000 biological process controllers can be used to achieve more measurement and control functions. (For more control functions, please refer to the introduction of relevant biological process controllers and fermentation monitoring software)