5JG Mechanical Stirring Glass Fermentation Tank

5JG Mechanical Stirring Glass Fermentation TankIndicators and configurations:

Nominal volume: 0.5/1/2/3/5/7/10 liters (optional)

Diameter to height ratio: 1:2 (adjustable);

Liquid filling coefficient: 70%

Tank system: The tank cover and bottom are made of high-quality SUS316L stainless steel, and the tank body is made of high-temperature resistant borosilicate glass with a liquid filling coefficient of 70%. The process structure is advanced and the operation is simple.

Mixing system: Mechanical mixing, mechanical sealing, fermentation standard six blade disc turbine paddle+four blade inclined paddle, adjustable blade height, and can also be replaced with different types of mixing paddles according to the special requirements of the fermentation process.

Infinite speed regulation, speed: 10-1000rpm ± 0.5% (higher speed can be customized)

The controller can achieve: DO correlation cascade, curve analysis, batch report analysis, alarm, data storage, sequence control (set according to fermentation time interval, automatic variable control, at least 10 segments), etc

Ventilation control: manual control, flow meter display. Including rotor flowmeter, imported filter membrane air sterilization filter, with a filtration accuracy of up to 0.02 μ m

Temperature control: jacketed water bath electric heating, automatic control, temperature control cooling water temperature+5 ℃~65 ℃ ± 0.2 ℃

Foam control: full automatic PID control and alarm, peristaltic pump automatically adds defoamer

Feeding control: PID fully automatic setting peristaltic pump switch control, automatic flow addition and metering.

PH control: Swiss Mettler electrodes (compatible with high-quality domestic electrodes) are used, and the peristaltic pump automatically adds acid and alkali to accurately control pH,

Display range: 0.00~14.00 ± 0.01,

5JG Mechanical Stirring Glass Fermentation TankFully automatic control range: 2.00~12.00 ± 0.05

DO control: using Swiss Mettler electrodes (compatible with high-quality domestic electrodes), associated with speed (optional air flow, feeding, etc.) for control, 0-150 ± 3%, display accuracy of 0.1%

Pressure control: manual control (automatic control optional), instrument display

Control system: Single tank can use BIOTECH-7000 biological process controller supplemented with BIOTECH-FCS fermentation monitoring software, which allows you to observe fermentation changes on-site and remotely monitor the fermentation process; If multiple or multi-stage fermentation tanks are used, BIOTECH-3000/6000/8000/9000 biological process controllers can be used to achieve more measurement and control functions.

(For more control functions, please refer to the introduction of relevant biological process controllers and fermentation monitoring software)

Optional configurations: liquid level control, feeding and weighing system, two-way feeding, online detection of methanol and ethanol content, exhaust oxygen and carbon dioxide detection, etc