Air treatment equipment manufacturer

The product is a customized product, and the above quotation is a deposit

Product Introduction

A cylindrical tower body wrapped as a whole with fiberglass, without segmented connecting flanges. The tower components consist of gas distributors, packing brackets, packing, spray devices, accessories, and control instruments.

Can be used in various industries that generate gases that require washing. This tower can be manually or automatically controlled according to user requirements. The gas enters the tower and comes into full contact with the washing solution inside, which can remove impurities and achieve the effect of purifying the gas.

Working principle

The gas is pressurized or sucked into the inlet section by a centrifugal fan, and then flows upward to the packing layer, where it reacts with the spray liquid. According to various indicators such as gas purification, a two-layer packing and spray device can be installed to treat the purified gas and discharge it through a defogger.

Application scope

It is a new type of gas purification treatment equipment. It is an improved version of the floating packing layer gas purifier and widely used in pre-treatment of industrial waste gas purification, dust removal, and other aspects, with excellent purification effects. For the coal gasification process, gas washing is inevitable, and this unit operation is used in any coal gasification technology. Due to its working principle resembling a washing process, it is called a washing tower.

consist of

A washing tower is similar to a distillation tower, consisting of a tower body, trays, reboiler, and condenser. Due to the fact that the washing tower is a device for coarse separation, the number of trays is generally small and usually does not exceed ten levels. The washing tower is suitable for separating mixed gases containing a small amount of dust. The components will not react, and the products should be easy to liquefy. Impurities such as dust (also known as high boiling materials) are not easy to liquefy or solidify. When the mixed gas enters the washing tower from the middle of the tower, due to the presence of product component liquid between the trays, the product component gas liquefies and evaporates, while impurities cannot be liquefied or solidified. When passing through the trays with liquid present, they will be fixed by the product component liquid, producing a washing effect. The washing tower is designed and manufactured based on this principle.

Contact: Manager Yao mobile phone:18831897799