Automatic vaporization hydrogen peroxide disinfection sterilizer

Automatic vaporization hydrogen peroxide disinfection sterilizer

Automatic vaporization hydrogen peroxide disinfection sterilizerOur company has collaborated with experts from the National Laboratory Accreditation Committee to complete the research, development, finalization, and production of a "vaporized hydrogen peroxide sterilizer". With the vaporized state of hydrogen peroxide, safe disinfection and sterilization can be achieved.

Product Introduction

1. Capable of continuously vaporizing hydrogen peroxide.

2. After being used by relevant units, the sterilization effect of the sterilized product has been fully verified.

3. Low price, high cost-effectiveness.

4. Simple and practical operation, easy daily maintenance.

Features

1. Effective vaporization of hydrogen peroxide, the vaporization amount can be pre-set with parameters and automatically calculated by the controller.

2. It can be directly placed in the space that needs to be sterilized, or it can be sterilized by introducing it into the required sterilization space through the air duct equipped with the equipment. The maximum single disinfection space is 200 cubic meters.

3. The vaporization outlet can be replaced with different nozzles through a DN100 quick installation interface according to the sterilization space requirements, and the operation of loading and unloading nozzles or air ducts is very convenient and fast.

4. Fully automatic control operation, capable of automatically calculating and dosing according to the sterilization space, catalyzing residual hydrogen peroxide gas after sterilization to generate oxygen and water.

5. A maintenance port is opened at the front and rear of the casing for easy debugging and maintenance. The rear maintenance port is equipped with louvers for heat dissipation.

6. The upper part of the front is equipped with a handle, and the lower part of the base is equipped with a universal wheel with a braking device for easy movement.

7. The touch screen operation surface is inclined at a 140 ° angle to the top surface, which is conducive to operation and observation.

8. The device is equipped with a remote control, which can remotely start and stop the equipment.

9. Can configure data interfaces RS-232 and USB ports as needed.

10. The device is equipped with a printer that can print records of the sterilization process.

11. Concentration detection interfaces can be set up as needed to monitor the concentration of sterilization gases.

12. A small window that can be easily opened and closed is set at the back edge of the top surface, and the lower part is the liquid filling port.

13. There is a drainage port located at the bottom of the front base for easy discharge of residual liquid.

14. The operating system is a full touch screen operation, and all functional operations except for the power switch are completed on the touch screen, which is simple and convenient. The touch screen system has functions such as operation, display, alarm, and recording.

Technical Specifications: