Beijing Small Soft Capsule Machine

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Beijing small soft capsule machine: The main moving parts use German precision bearings. The whole machine adopts discrete drive, with low noise and smoother operation. The mechanical moving parts adopt independent single point adjustable lubrication method, effectively reducing mechanical wear and greatly extending the average time.

Product Details

　　Beijing small soft capsule machine:

　　Main parameters：

Host size: length x width x height=2110 x 1220 x 1820

Single plunger dosage: 0-1.5ml (standard) 0-3ml (enlarged)

Roll mold size: ￠ 150 * 200mm ￠ 150 * 250mm

Roll mold speed: Zui is 5 rpm high, commonly 3.5~4.5 rpm

Production capacity: 200 molds

Host power: 16kW (including 2 2.5kW rubber drums)

Drying machine power: 4kW

Host weight: 900kg

Number of plunger in medication pump: 20

109440 pills/hour# 08ov@4rpm )

51840 capsules/hour (# 20ob@4rpm )

250 mold

136800 capsules/hour (# 08 ov @ 4 rpm)

69120 capsules/hour (# 20 ob @ 4 rpm)

Control mode: PLC+touch screen

Cooling water temperature regulation range: 0 ℃ -20 ℃

Temperature state error of cooling water:<± 0.5 ℃

Drying machine: 4800 * 800 * 1400 (8 sections) roller cage drying, each section of roller cage is equipped with a separate high air volume fan

Advantages: 1. One device can install two types of molds, and small molds can be installed when the output is small, saving costs,

When the output is high, installing large molds improves production efficiency,

2. Self centering mold disc for higher precision mold installation,

3. The dosage of each plunger of the medication pump can be independently adjusted,

4. The injection time can be adjusted separately during static or dynamic conditions

　　Beijing small soft capsule machine:

　　Features:

⑴ The cooling of the rubber drum adopts liquid cooling method, with a temperature adjustment range of 0 ℃ to 20 ℃.

⑵ High productivity, with an annual output of up to 1 billion grains per machine (calculated as # 8 OV, 24 hours per day x 320 days).

The new 8-section shaped drying roller cage adopts variable frequency speed regulation, with a more reasonable structure. The dismantling of the rolling cage does not require moving the dryer, making it easy to clean. There is a feeding tray under the rolling cage, which is more in line with GMP requirements.

⑷ The medication pump loading display device allows for intuitive viewing of the actual loading value when adjusting the loading amount, eliminating the tedious weighing and calibration process.

⑸ The spray body can be lifted and lowered quickly and conveniently, and can be stopped at any position.

The medicine pump sprays medicine synchronously with the mold and is automated, making it easy to adjust the spraying time.

The adjustable temperature hopper is a standard configuration and has functions such as mixing, automatic feeding, low liquid level alarm, and shortage alarm.

⑻ Micro rubber lubrication, with only about 1kg of lubricating oil used per 8-hour shift, truly achieves capsule no cleaning, shortens drying time, and can save users a lot of money.

(9) PLC control, with operation modes available in large-sized touch screen mode and switch button mode, both of which adopt cantilever structure. The control system has fault diagnosis function, reserved network interface, and can achieve remote diagnosis after upgrading.

The main moving parts are selected from German precision bearings. The whole machine adopts discrete drive, with low noise and smoother operation. The mechanical moving parts adopt independent single point adjustable lubrication method, effectively reducing mechanical wear and greatly extending the average time.

The medication pump adopts a new cam mechanism, which eliminates the manual synchronization process of the reversing plate.

The insertion position of the heating cable is more reasonable.