Bowl grinder

System Composition

The bowl grinder consists of two main systems: the grinding system and the control system

System functions

Control system: allows for simple and direct parameter design of equipment.

Grinding system: Powered by a high-power customized motor, the sample is crushed through friction and compression of the mortar and pestle under the control of the control system.

Application Features

It can mix and grind samples that are soft, hard, brittle, viscous, or wet, including dry grinding, wet grinding, and frozen grinding.

technical indicators

1.Working principle: The grinding system of the mortar grinder, under the precise control of the electronic system, enables the preparation of samples through friction and compression between the mortar and pestle. It can grind hard, medium hard, soft, brittle, and paste like samples.

2.Multiple grinding kits to choose from: hard porcelain, hard steel, stainless steel, agate, zirconia, corundum, tungsten carbide

3.Grinding kitThe mortar and pestle adopt a plug-in structure, which can be quickly disassembled and installed, facilitating cleaning and avoiding cross contamination between samples

4The hood is equipped with a safety lock device, and the control panel has an overload bar display to show the real-time load status of the instrument, ensuring operation and equipment safety.

5High energy power drive electrical parameters: 220V 50/60Hz 180W to ensure continuous and stable long-term operation of the equipment

6Injection size: less than 15mm

7Final sample size: approximately 10um (depending on the properties of the sample)

8Sample batch processing capacity: 10-200ml

9Grinding time: The digital display shows 1-99min, which can be continuously operated for a long time and can be adjusted continuously

10Speed: Digital display 50-150rpm (revolutions per minute), continuously adjustable, suitable for different samples, especially for grinding thermosensitive samples

11The grinding system has a sealed dust-proof design, effectively reducing dust pollution and noise pollution; There is an LED light source in the grinding room, which makes it easy to observe the grinding status of the sample.

12The instrument can be adjusted through a knob to adjust the scraper plate and pestle, ensuring that the entire instrument is in the best grinding state.

13Pressure adjustment of mortar and pestle: It can be adjusted through a ruler when the instrument is working.

14The instrument is equipped with a feeding port and an observation port, which facilitates feeding and observing the grinding status of the sample. In addition, the feed inlet can be wet ground through a funnel or ground at low temperature with liquid nitrogen. (Dry grinding, wet grinding, liquid nitrogen grinding).