Characteristics of oil-water separator

　　GF105Characteristics of oil-water separatorintroduction

The oil-water separator is mainly used to separate various slag containing oil products, such as waste fuel, diesel, engine oil, lubricating oil, transformer oil and other mineral oils to remove moisture and mechanical impurities. At the same time, it can also be used to separate various slag containing bio oils and vegetable oils. Especially suitable for liquid-liquid separation of emulsions with minimal weight difference and liquid-liquid solid three-phase separation containing small amounts of impurities (such as separation of oil, water, and impurities).

GF105Characteristics of oil-water separator：

1. Oil water separation is fast and efficient. The treatment liquid is uniformly dispersed in the separator using a disperser and a distributor, and the fluid turbulence is reduced by using permeation and slow flow techniques, allowing large oil droplets to quickly float up.

2. The small oil droplets in the treatment liquid quickly coalesce into large oil droplets through a roughener, thereby rapidly reducing the oil content in the water.

3. The water purification system adopts three-stage filtration, and deep water undergoes deep oil removal treatment. After water purification, it directly meets the water quality discharge standards.

4. The water purification system is equipped with a backwash device. Timely clean the hydrophilic and oleophobic fiber filter material through a backwash device to maintain its effectiveness and extend its service life.

5. The equipment is equipped with mobile casters, which can be quickly replaced on the job site as needed.

6. The equipment is equipped with comprehensive protective devices. By implementing comprehensive protection for equipment pressure, power outages, overpressure, undervoltage, etc. through various execution components, it can effectively ensure the normal operation of the equipment and prevent accidents from occurring.

7. The equipment has a high degree of automation, saving personnel. Adopting advanced moisture sensors to control the drainage of oil-water separators. When the water level reaches a high point after oil-water separation, the air solenoid valve automatically starts to drive the inlet diaphragm pump for drainage. The water enters the water purification system for automatic purification treatment. When the water level reaches a low point, the air solenoid valve closes and the inlet diaphragm pump stops draining.

Main products: Tube centrifuge series, GQ series high-speed tube centrifuge, Chinese medicine clarification tube centrifuge, GF series tube centrifuge, blood separator, oil-water separator, tripod upper discharge centrifuge, tripod settling centrifuge, bacterial cell separator