Combustion gas sampler

NegotiableUpdate on 03/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Combustion gas sampler

Product Details

Product Introduction

Can analyze the gas obtained after polymer combustion.
Unlike the JIS method, it can analyze combustion products with high molecular weight.
Adopting Curie point heating method, with excellent reproducibility.
The thermal decomposition of polymers in air can also be analyzed by GC.
The combustion gas can be captured in the primary adsorption tube and transferred to JTD-505 Ⅱ for combustion gas analysis.
The structure of the combustion chamber can be changed according to different samples.

Technical Parameter

combustion method	Thermal decomposition combustion method
Combustion tube	Inner diameter 14mm × 120mm
Heating method	Curie point heating method
High frequency power supply	Output power 150W
ignition coil	Nickel chromium alloy coil
Mode switching	Thermal decomposition/combustion mode, switched by button
Combustion chamber and insulation pipe	Room temperature~200 ℃
Adsorption tube temperature	Room temperature~200 ℃ (special accessory Cryofocus can be configured)
Adsorption tube	Inner diameter 12mm × 120mm
Auxiliary gas flow rate	0～500mm/min， pressure control
size	280(W)×300(H)×440(D)mm
Power supply and weight	100V 4A、27.5Kg
Standard attachments:
Combustion tube (content volume 15 ml)	2 pieces
Combustion pipe rack	1 piece
Gasket for combustion tube (bottom)	1 piece
Combustion gas suction tube (PAT tube)	2 pieces
Combustion gas suction pipe rack	1 piece
Gasket for combustion gas suction tube (bottom)	1 piece
Pyrofoil (20 pieces each of F764, F670, F590, F445, F358)	1 bag
U-tube	1 set
Piping group	1 set
Connecting line	2 pieces
power line	1 piece
Fuse (8A)	1 piece
Operating Instructions	1 volume