- Phone
-
Address
Room 426, Block A, Building M8, No.1 Jiuxianqiao East Road, Chaoyang District, Beijing
Product Categories
Beijing Sangyi Experimental Instrument Research Institute
Diggor 22 C centrifuge (industrial use)
NegotiableUpdate on 03/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Power: 1260W, Current: 50-60Hz, Voltage: 220-230V
Product Details
The Diggor 22 C is used for separating oil and gas, as well as for sediment and aggregate analysis. The rotor can use 6-inch and 8-inch tubes and 28 finger tubes.
*Maximum carrying capacity: 4 x100ml (8/6 "); Maximum centrifugal force/speed: 2425xg/3000RPM
*Compliant with standards: ASTM D 91, D96,D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546,API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Non centrifugal state, centrifuge tube upright
*GRS: Exhaust system (optional accessory), pre installed
characteristic
TFT color display screen, observable distance exceeding 3m
*Display RPM/RCF, time, acceleration/deceleration digitalization (PCBS), with unbalanced positioning function (ULS)
*Speed control, step 10RPM/10xg
*Real time display function of RCF based on actual use of attachments.
*Positive or countdown function, reaching the set RPM/RCF timing function to ensure experimental reproducibility
*Timed program setting from 1min-99h, step by 1s, with step-by-step and stop program functions
*PCBS function: The progressive control acceleration and braking system can have up to 175 selectable slopes to prevent sample homogenization after separation.
*ULS function: In case of unbalanced situation, the unbalanced position number of the rotor will be directly displayed.
*40 sets of program memory with password protection function
*There are different prompt sounds and screen information prompts, which display the real-time operation status of the device
heating
*Equipped with a preheating program function, it can perform preset temperature preheating after the rotary head is loaded.
*Temperature sample RT+5 ℃ -80 ℃, step 1 ℃, freely switch between Celsius or Fahrenheit
*The temperature sensor is located inside the cavity and has over temperature protection
*Internal insulation material to prevent heat loss
secure
*The safety system of centrifuge cover
-Automatic lock cover, mechanical double lock
-Emergency lid unlocking function
-Lock cover protection during operation
-Prevent sudden fall protection of the cover
-There is an observation hole on the cover for operation inspection
*Unbalanced check, automatic shutdown will occur
*There is a safety protection layer between the centrifuge chamber and the outer shell
*The centrifuge chamber is made of stainless steel material (easy to clean)
*The rotor can be disassembled when the cover is closed
*Both the rotor and adapter can be sterilized by high-pressure steam, making installation easy
*Forcing internal air flow can reduce temperature increase
*Energy saving setting with automatic power-off option
Easy to use
*Microcomputer program control
*Brushless maintenance free motor
*Rotor and adapter memory function
*Noise level, below 60dB
*There are functions for starting, stopping, opening the lid, and instantaneous centrifugation
*During operation, speed adjustment can be achieved through RPM/RCF.
*Can be programmed to automatically open the lid
*Automatically memorize the last parameter setting value
*Automatic turn recognition, overspeed protection
TFT color display screen, observable distance exceeding 3m
*Display RPM/RCF, time, acceleration/deceleration digitalization (PCBS), with unbalanced positioning function (ULS)
*Speed control, step 10RPM/10xg
*Real time display function of RCF based on actual use of attachments.
*Positive or countdown function, reaching the set RPM/RCF timing function to ensure experimental reproducibility
*Timed program setting from 1min-99h, step by 1s, with step-by-step and stop program functions
*PCBS function: The progressive control acceleration and braking system can have up to 175 selectable slopes to prevent sample homogenization after separation.
*ULS function: In case of unbalanced situation, the unbalanced position number of the rotor will be directly displayed.
*40 sets of program memory with password protection function
*There are different prompt sounds and screen information prompts, which display the real-time operation status of the device
heating
*Equipped with a preheating program function, it can perform preset temperature preheating after the rotary head is loaded.
*Temperature sample RT+5 ℃ -80 ℃, step 1 ℃, freely switch between Celsius or Fahrenheit
*The temperature sensor is located inside the cavity and has over temperature protection
*Internal insulation material to prevent heat loss
secure
*The safety system of centrifuge cover
-Automatic lock cover, mechanical double lock
-Emergency lid unlocking function
-Lock cover protection during operation
-Prevent sudden fall protection of the cover
-There is an observation hole on the cover for operation inspection
*Unbalanced check, automatic shutdown will occur
*There is a safety protection layer between the centrifuge chamber and the outer shell
*The centrifuge chamber is made of stainless steel material (easy to clean)
*The rotor can be disassembled when the cover is closed
*Both the rotor and adapter can be sterilized by high-pressure steam, making installation easy
*Forcing internal air flow can reduce temperature increase
*Energy saving setting with automatic power-off option
Easy to use
*Microcomputer program control
*Brushless maintenance free motor
*Rotor and adapter memory function
*Noise level, below 60dB
*There are functions for starting, stopping, opening the lid, and instantaneous centrifugation
*During operation, speed adjustment can be achieved through RPM/RCF.
*Can be programmed to automatically open the lid
*Automatically memorize the last parameter setting value
*Automatic turn recognition, overspeed protection
EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC
Execution standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010.
Ordering Information
|
order No |
Dimensions W x d x h mm |
Net weight Kg |
voltage |
Current Hz |
Power W |
|
CE196 |
540 x 650 x 400 |
77 |
220-230 |
50-60 |
1260 |
Similar Product Recommend
