Disinfectant vibrating screen

With the increasing emphasis on health and the improvement of quality of life, disinfection products have quietly entered people's daily lives, and more and more manufacturers have sprung up like mushrooms. However, the anti-corrosion problem of disinfectants on equipment during the production process has not been effectively solved, especially in the granulation and screening process, which often pollutes materials and seriously affects product quality.

After two years of innovative experiments, Xinxiang Haorui Machinery Equipment Co., Ltd. has successfully developed an all plastic anti-corrosion vibrating screen, thereby solving the pollution caused by the screening process on materials.

Product features: The screen frame is fully plastic processed and formed, replacing the original titanium material and reducing investment.

The screen structure is integrated, which increases the strength during the screening process and solves the problem of product quality being unable to be guaranteed once the screen is damaged and leaked.

Regarding the screening process and pre process of disinfectant particle material dichloroisocyanuric acid (disinfectant, hydrogen uric acid) particle material: sodium dichloroisocyanurate, sodium trichloroisocyanurate, calcium hypochlorite, compound bromochlorohydantoin disinfectant, youchlorojing, strong chlorine essence,Chlorine tablets, instant tablets, sustained-release tablets, aquatic feed and other front-end equipment are all granulators. Due to the special nature of dichlorotrichloride materials, there are certain differences from general granules and powders. Dichlorotrichloride has strong corrosiveness and is mostly produced in the form of granules and tablets. The size of granules is generally 8-20 mesh and 20-40 mesh, and the shape of tablets is the same as that of medical tablets (tablets are mostly formed from fine powder below 40 mesh using a tablet press, and are used for swimming and water storage on site). ThereforeDisinfectant vibrating screenThe material used is significantly different from that of general equipment, mainly due to its strong corrosion resistance.

1、 Screening equipment - principle:
Disinfectant vibrating screenIt is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to quickly change the screen and has a fully enclosed structure. It is suitable for screening and filtering materials such as particles, powder, and mucus.
Working principle: An upright vibration motor is used as the excitation source, and eccentric weights are installed at the upper and lower ends of the motor to convert its rotational motion into horizontal, vertical, and inclined three-dimensional motion, which is then transmitted to the screening surface for screening. Adjusting the phase angle between the upper and lower ends can change the motion trajectory of the material on the screen surface. Thus, the material can quickly pass through the sieve, achieving the purpose of screening.

2、 Structure diagram of screening equipment:

3、 Screening equipment - features:
It has high efficiency, exquisite design and durability, and can sieve any powder or mucus.
Easy to change the network, simple to operate, and easy to clean.
The mesh is not blocked, the powder does not fly, and it can be sieved up to 500 mesh or 0.028mm.
☆ Impurities and coarse materials are automatically discharged, allowing for continuous operation.
☆ * Grid design, long screen usage time, fast screen replacement only takes 3-5 minutes.
☆ Small size, no space occupation, easy to move.
The maximum height of the screening machine can reach five layers, and it is recommended to use three layers.

4、 Equipment model and parameters:

5、 Separate design of mother and child network:
Features:
1. Save time (screen replacement can be completed in 3-5 minutes).
2. Save manpower by using only two people when switching networks.
3. Increase the smoothness of the production line.
4. Increase the lifespan of the sieve and prevent bouncing balls from directly hitting the subnet.
5. The use area of the screen mesh has increased.
6. Changing the network on this machine is very simple and fast. Just follow the order shown below and it will take no more than five minutes to complete the network change.

6、 The impact of oscillator adjustment on screening method:

By changing the phase angle or mass of the oscillator, the power source can drive the oscillator to generate different excitation forces, thereby changing the amplitude in the horizontal or vertical direction, thus affecting the screening flow rate and efficiency coefficient. Below are some general characteristics of adjusting the effectiveness from different angles.

Haorui Machinery Special Reminder:
When making any phone/letter inquiries about plastic vibrating screens, please provide the following information together in order to respond quickly and accurately to your inquiry
★ Raw materials to be processed: name, particle size, structure, specific gravity, water content, viscosity, temperature, etc
★ Purpose of use: for impurity removal, filtration, grading, granulation, and other purposes
★ Processing capacity: kg/h, L/h
★ Screen specifications (mesh size or aperture) and screen grading number
★ Other special requirements: such as temperature resistance, medium resistance, etc

Xinxiang Haorui Machinery Equipment Co., Ltd

: Zhang

Telephone:

：