Efficient V-type mixer

Efficient V-type mixerThe series of products is an efficient asymmetric mixer, which is suitable for mixing powder or granular materials in industries such as chemical, food, pharmaceutical, feed, ceramics, metallurgy, etc. The machine has a reasonable and simple structure, operates in a closed manner, and is easy to feed in and out. The cylinder body is made of stainless steel material (manually or vacuum fed), which is easy to clean and is one of the basic equipment of the enterprise.

Machine Principles and Structure

One end of the machine is equipped with a motor and a reducer. The motor power is transmitted to the reducer through a belt, and the reducer is then transmitted to the V-shaped bucket through a coupling. Continuously operate the V-shaped bucket, driving the materials inside the bucket to mix up, down, left, and right inside the bucket.

1. Before use, an air run test should be conducted. Before the test, the firmness of all connecting parts of the horizontal V-type mixer, the amount of lubricating oil in the reducer, and the integrity of the electrical equipment should be checked. Then, the main switch should be closed and the power supply should be turned on for the air run test.

2. Installation: Place the machinery steadily, install the machine feet, level them, and ensure that the machinery can operate smoothly.

3. Before use, add oil to the area that needs to be refueled, and then perform no-load operation to check whether the fasteners are loose, whether the electrical system is normal, and whether the mechanical system is running normally. If there are any abnormalities, repair and debug them.

4. Turn the feeding port to the top, open the feeding cover for feeding, and the feeding amount should not exceed the specified volume. Then close the feeding cover tightly and start the machine for operation. If any abnormalities are found during the process, the machine must be stopped for inspection.

5. Granulated drugs are strictly prohibited from being produced in multiple batches and mixed together. It is also prohibited to produce different varieties of drugs and foods in parallel, and they must meet GMP standards.

6. When changing varieties, the inside and outside of the hopper must be washed clean and disinfected.

Efficient V-type mixerThe usage method is to first open the feeding port of the mixer and confirm whether the discharge port is closed while running with the material. Then, according to the process control requirements, the specified amount of material should be fed into the V-shaped hopper. After feeding, in order to prevent material from flowing out during mixing, the feeding port should be closed and locked. Next is the working time of the machine. Turn on the power button, rotate the stop button to the left, start the reverse button of the mixer, adjust the motor speed within the process specified speed, and mix the product at 600r/min. After the mixing reaches the specified time in the process, stop the machine by adjusting the motor speed button. When stopping, make sure that the discharge port of the mixer is facing the ground and adjust the motor speed button to position 0. The V-shaped mixer will rotate the stop button to the right to cut off the power. Finally, it's about feeding: Open the feeding port of the V-type mixer and use the designated container to load the material at the feeding port until all the material in the hopper is discharged.

There are still many things we need to pay attention to during the installation and use of the V-type mixer, which is beneficial for us to maintain the V-type mixer and increase its service life.

1. Installation: Place the machinery steadily, install the machine feet, level them, and ensure that the machinery can operate smoothly.

2. Before use, add oil to the area that needs to be refueled, and then perform no-load operation to check whether the fasteners are loose, whether the electrical system is normal, and whether the mechanical system is running normally. If there are any abnormalities, repair and debug them.

3. Turn the feeding port to the top, open the feeding cover for feeding, and the feeding amount should not exceed the specified volume. Then close the feeding cover tightly and start the machine for operation. If any abnormalities are found during the process, the machine must be stopped for inspection.

4. When changing varieties, the inside and outside of the hopper must be washed clean. It is suitable for mixing powdered or granular materials in industries such as chemical, food, pharmaceutical, feed, ceramics, metallurgy, etc. The machine has a reasonable and simple structure, operates in a closed manner, and is easy to feed in and out. The cylinder body is made of stainless steel material (manually or vacuum fed), which is easy to clean and is one of the common basic equipment in enterprises.