Elesa+Genter spring latch with surface mounting flange

Elesa+Genter spring latch pin with surface mounting flange, plunger pin can be rotated 180 degrees by turning the latch; Retract along the curve of the guiding body. If it is necessary to temporarily keep the plunger pin from protruding, the notch at the upper end of the curve will fix the latch in the appropriate position.

Specifications

1. Type

L-type: left-hand indexing cam

R-type: right-handed indexing cam

2. Steel Style ST

housing

steel

Galvanized, Blue Blunt Treatment ZB

Galvanized and spray coating

Black, textured finish SW

latch

Steel, galvanized, blue dull treatment

sales

Steel, galvanized, blue dull treatment

spring

Stainless steel AISI 316Ti

Stainless steel style A4

housing

Precision cast stainless steel A4

AISI 316

sales

Stainless steel AISI 316

spring

Stainless steel AISI 316Ti

2、 Information

Using the Elesa+Gartner GN 722.3 spring latch pin, the plunger pin can be retracted along the curve of the guide body by rotating the latch 180 °. If it is necessary to temporarily keep the plunger pin from protruding, the notch at the upper end of the curve will fix the latch in the appropriate position. The ZB and SW versions are designed for steel structure applications, while the A4 stainless steel version is suitable for highly corrosive environments.

The dimensional tolerance between the plunger pin and the guide rail has been selected, ensuring functional reliability even after welding, coating with anti-corrosion layer, or contamination.

When fixing, groove or hexagonal mounting holes allow the use of DIN 912 hex screws and DIN 931 or DIN 934 hex screws or nuts.