Elesa+Genter stainless steel rotary locking latch

The Elesa+Genter stainless steel rotary locking latch GN 516.5 is designed for some common applications, such as situations where elastic elements (seals on doors/protective covers) are required to firmly adhere to the end of the lock tongue (locking position) to prevent vibration. $n

1、 Elesa+Genter stainless steel rotary locking latch GN 516.5 specification

1. Type

(1) VK8 type: Square lock cylinder A/F8 operation

(2) SCH type: single slot operation

(3) VDE type: dual lock cylinder operation

(4) RG type: Rolling knob operation GN 7336

(5) KG type: wrench operation

(6) HG type: Handle operation

2. Stainless steel

(1) AISI 316 Lock Shell

(2) AISI 316 locking device

(3) AISI 316 bolt

(4) AISI 304 latch lock

3. All handles (RG/KG/HG type)

(1) Plastic (polyamide PA)

(2) Black, matte finish

(3) Cap, light gray, matte

4. Protection level: IP 65

2、 Elesa+Genter Stainless Steel Rotary Locking Latch GN 516.5 Information

The GN 516.5 stainless steel rotary locking latch is equipped with a locking device that can convert the 90 ° rotational movement of the operating element (key) into a 6mm linear travel.

This device is designed for some common application scenarios, such as situations where elastic elements (seals on doors/protective covers) are required to firmly adhere to the end of the lock tongue (locking position) to prevent vibration.

9 different cranks cover a locking distance (locking area) of 19 to 41mm. If the determined locking position is between two latch distances A, the next set of smaller spacing values must be selected.

GN 516.1 rotary clamping latch is supplied as a loose part.