Experimental spray dryer miniature stainless steel drying equipment

Experimental spray dryer miniature stainless steel drying equipment It is mainly suitable for the research and production of trace particle powders in universities, research institutes, and laboratories of food, biology, beverage, chemical, material, pharmaceutical and other enterprises. It has broad-spectrum applicability to all solutions such as emulsions and suspensions, and is suitable for drying thermosensitive substances such as biological products, biopesticides, enzyme preparations, etc. Because the sprayed material is only subjected to high temperature when sprayed into mist like particles, it is only heated instantly and can maintain the active ingredients of these active materials without damage after drying.

Experimental spray dryer miniature stainless steel drying equipment Characteristics:

1. The spray, drying chamber and collection device are made of transparent, high-quality, high temperature resistant and high borosilicate glass, so that the spray drying process can be carried out in a pollution-free and stable environment. The whole process of spray drying experiment can be seen, which is convenient for controlling the experiment process and finding and adjusting problems in time. All glass components are easy to disassemble and clean.

2. Built in imported oil-free air compressorThe particle size of the powder is normally distributed, with good fluidity and very low noise, less than 60db, which meets the national laboratory noise standards

3. The atomization structure of the two fluid spray is made of high-quality and high-precision 316 stainless steel material, with uniform atomization.

4. The temperature control adopts real-time PID constant temperature control technology, ensuring accurate temperature control.

5. The feeding amount can be adjusted by a peristaltic pump, and a minimum of 30ml of sample can also complete one experiment.

6. The jet nozzle automatically clears (passes through the needle) and the frequency can be adjusted. When the nozzle is blocked, it will automatically clear to ensure the continuity of the experiment

7. Fully automatic manual dual mode, PLC control, color touch screen display, Chinese and English operation interface, all parameters have LCD display.

8. It has a protective function. If the fan does not start, the heater cannot start.

9. The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.

10. It can be used immediately after being powered on, without the need for any auxiliary facilities.