Fully automatic drug dissolving and foaming machine

FY seriesFully automatic drug dissolving and foaming machine

Wholesale supplyFully automatic drug dissolving and foaming machineThis device is a control system composed of basic components such as Delta inverter, Omron liquid level gauge, and Yadeke electronic control. It has a high degree of automation, stable performance, reliable operation, menu operation, and is simple and clear.

OnePreparation process
The ZJY series dry powder dosing system is a fully automatic continuous preparation and dosing system designed for powdered materials. The entire process, from powder to prepared solution, achieves fully automatic, safe, and continuous operation. Dry powder enters the mixer from the hopper according to the required dosage (set screw speed), and after wetting, it enters the mixing tank for dilution (set inlet flow rate) to achieve the required concentration of solution. The diluted solution flows through the maturation tank and then enters the storage tank. The liquid is transported to the point by the metering pump. When the solution in the storage tank is at a low liquid level, the liquid level switch outputs a signal to start the equipment and restart the solution preparation process; When the solution in the storage tank is at a high liquid level, the liquid level switch sends a signal, and this cycle process stops; If the storage tank is empty, the cycle will start again. Close the inlet solenoid valve in this way, and it will automatically start after adding the material.

2： Shanghai manufacturer wholesale supplyFully automatic drug dissolving and foaming machineSpecification Model

3： The automatic dry powder feeding device consists of the following parts

*Water supply system * Dry powder dosing system * Dry powder pre mixing system * Dehumidification and drying system * Integrated three tank combination box * Mixing system * Automatic control and detection system.

4： Shanghai manufacturer wholesale supplyFully automatic drug dissolving and foaming machineStandard Configuration
Standard configuration: PP polypropylene tank body; Dry powder dosing system; Liquid medicine mixer screw moisture-proof heater; Injection control solenoid valve; Low speed stainless steel mixer; Automatic control system for liquid level sensor; Anti drug powder breakage detection alarm device; Moisture resistant heater for hopper; Inlet pressure regulating valve; Variable frequency automatic control cabinet.

The automatic dry powder dosing system operates fully automatically, saves manual medication dosage, ensures processing efficiency, avoids waste, has reliable quality, is easy to maintain, has a beautiful appearance, and is powerful. The process can be designed according to user requirements. Working principle of AM automatic dosing device:
The preparation process of dry powder solution is gradually completed through the classification of various solution tanks. The solution tanks are separated to ensure the reaction time and constant concentration in each tank, avoiding any direct path between the pre fabricated tank and the drug storage tank. The automatic control system is connected to the liquid level controller on the storage tank. Once the liquid level reaches a low level, the inlet solenoid valve is triggered to open, the drying machine is started, and the dosage and installation water volume are set to obtain accurate concentration. When the liquid level reaches the highest point, this cycle process stops. Of course, the mixer continues to work according to the set time

Characteristics of PAM automatic dosing device:
Fully automatic operation, saving labor
The dosage of the medication is precisely adjustable to ensure effective treatment and avoid waste
PAM automatic dosing device features a fully stainless shell and imported accessories, ensuring reliable quality and excellent corrosion resistance
The PAM automatic dosing device comes in two types: PP material and stainless steel, with easy maintenance and exquisite appearance

FY seriesFully automatic drug dissolving and foaming machine