Plate and frame precision filter machine

stainless steelPlate and frame precision filter machineUsed for solid-liquid separation of various suspensions, with a wide range of applications. Applied in industries such as pharmaceuticals, food, chemicals, environmental protection, and water treatment.Plate and frame precision filter machineThe suspension material is pumped into each sealed filter chamber of the filter machine. Under pressure, the filtrate passes through the filter layer and filter cloth, and is discharged through the outlet of the filter cloth. The filter residue remains in the filter frame to form a filter cake, thereby achieving solid-liquid separation.

Stainless steel plate and frame filter machine

Stainless steel plate and frame filter machine is a product that integrates coarse filtration, fine filtration, and ultrafiltration. The main condition is to select different filter materials according to the user's requirements for the production of the product, in order to achieve decarbonization, clarification, and sterilization. It can also be used for residue and water treatment. It is widely used in the production of large and medium-sized hospital preparations, pharmaceutical factory infusion oral liquids, distillery brewing, beverage factory mineral water filtration, and liquid clarification filtration, liquid-solid suspension filter residue filtration, and gas purification filtration in light industry, chemical industry, metallurgy, electronics, environmental protection and other departments.

This product has a novel and compact structure, beautiful appearance, easy operation, durability, and a wide range of applications.

1、 Specifications and technical data

After replacing different filter media and liquids, the flow rate varies, so production units generally use filter presses with larger flow rates for filtration first.

2、 Instructions for use

1. When using, rinse repeatedly with 3-5% sodium carbonate solution, then rinse with clean water, and disinfect to measure the pH value within the allowable range.

2. Check if the silicone ring of the filter is properly inserted and flat to prevent water leakage. The thin filter material can be moistened with distilled water and attached to the mesh surface. The filter plate should be placed inside the silicone ring and pressed tightly against the top plate.

3. When starting the infusion pump, first close the inlet valve, then start it, pay attention to the direction of power rotation, gradually find the required pressure for the inlet valve, and discharge the air, then it can be filtered. The general working pressure is<0.1~0.2MPa.

4. When using, attention should be paid to the rate of increase and sudden decrease of the pressure surface to determine whether the filter material is blocked or broken.

5. When stopping the pump, the inlet valve should be subtracted first to prevent sudden fluid backflow from damaging the filter material. Then, the pump should be stopped and the air bolt should be opened. After the filtrate is completely drained, the top plate should be loosened to replace the filter material and clean it.

6. If the machine adopts microporous membrane precision filtration, the feed liquid must be selected with coarse filter material, and used after pre filtration to avoid clogging the membrane and affecting the filtration quality.

7. This machine is suitable for filtering media such as gauze, linen, cotton cloth, silk cloth, canvas, nylon silk, filter paper, slate, microporous membrane, and ultrafiltration membrane.