Fully automatic vibrating fluidized bed dryer

NegotiableUpdate on 02/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Based on the material characteristics of sodium sulfate and our company's experience in this field, the fully automatic vibrating fluidized bed dryer plans to use a linear vibrating fluidized bed to dry sodium sulfate. Vibration fluidized bed dryer, abbreviated as vibration fluidized bed, is a new type of fluidized bed high-efficiency drying equipment suitable for drying granular and powdery materials. It has the advantages of easy operation, energy saving, and environmental protection. This equipment is widely used for drying powdered and granular materials in industries such as chemical, pharmaceutical, food, dehydrated vegetables, grains, and minerals.

Product Details

　　Introduction to Fully Automatic Vibration Fluidized Bed Drying Machine Equipment

　　Vibration fluidized bed dryer manufacturerVibration fluidized bed, also known as fluidized bed, is a new type of fluidized bed high-efficiency drying equipment suitable for drying granular and powdery materials. It has the advantages of easy operation, energy saving, and environmental protection.

Principle: The blower filters the ambient air through primary and medium efficiency air filters, heats it to the set temperature through a steam heat exchanger, and then enters the bottom of the fluidized bed through a pipeline as a material fluidization and drying heat source. Wet materials enter the bed plate (porous plate) inside the machine through the feeding port. Under the excitation force of the vibration motors on both sides of the fluidized bed, the materials are thrown forward continuously in a horizontal direction. The hot air passes through the bed plate (porous plate) upwards and comes into contact with the wet materials. The wet materials are suspended in the hot air, producing a mixed bed layer of material particles and hot air, like liquid boiling, and transferring heat and moisture between the materials and the hot air. After heat exchange under the action of the induced draft fan, the hot air carries water vapor and small material particles, which are then removed by the cyclone separator and bag filter before being discharged from the outlet of the induced draft fan.

　　process conditions

Drying method: Linear vibrating fluidized bed

Contact method between material and hot air: flow-through

Heat source and heating method: saturated steam (0.6Mpa, 165 ℃)

Dry inlet air temperature: 140 ℃

Dry exhaust temperature: 80 ℃

Product discharge method: Host

Dust removal method: cyclone separator+bag filter; Cyclone separator+water film dust collector

Power supply: 380V, 50Hz

　　Material conditions

Material name: Sodium sulfate

Dry product output: 305kg/h