XSG rotary flash dryer

XSG Rotary Flash Drying Machine $nXSG-16 H-Acid Rotary Flash Drying Machine: The flash drying machine is a new type of continuous drying equipment that integrates drying, crushing, and screening, especially suitable for drying filter cake like, paste like, and slurry like materials. The drying time of wet materials in the drying tower is only 5-8 seconds, and the moisture evaporates instantly. The quality of the dried product is closely related to the drying temperature, wind speed, air volume, and crushing speed.

XSG rotary flash dryer

　　Determination of Calculation Process Parameters for XSG-16 H-Acid Rotary Flash Drying Machine:Dry product yield: W dry=1200kg/h; Raw material moisture content: ω 1=45%; Product moisture content: ω 2=5%

Feeding temperature: θ 1=20 ℃; Discharge temperature: θ 2=70 ℃; Specific heat: Cs=0.4kcal/kg ·℃

Inlet air temperature: t1=215 ℃; Exhaust temperature: t2=85 ℃

　　XSG rotary flash dryer

　　Usage characteristics

1. Adopting dual channel tangential air intake avoids the velocity non-uniformity of the rotating field in the radial flow field.

2. Effectively control the final moisture content and fineness, and coordinate and unify the control of swirl blades, mixing speed, inlet air speed, temperature, etc.

3. The rotating blade arrangement structure * has the characteristics of low wear, wide contact surface, and high cutting force.

4. Skilled in handling heat sensitive materials, the bottom of the host belongs to the high-temperature zone, where the gas velocity is high and there is a cooling water protection device to avoid the possibility of material coking and discoloration.

　　Material and related design parameters of XSG-16 H-acid rotary flash dryer:

1. Material Name: H-Acid H-Acid is a chemical substance mainly used in the production of acidic, direct, and reactive dyes, such as Acid fuchsin 6B, Acid Dahong G, Direct Black, Reactive Brilliant Red K-2BP, Reactive Purple K-3R, Reactive Dissolved Blue K-R, and more than 90 other types. These dyes are used for dyeing wool and cotton fabrics. It can also be used for the production of drugs.

2. Dry product output: not less than 1200kg/h

3. Initial moisture content: 45% (wet basis)

4. Final moisture content: 5% (wet basis)

5. Specific gravity: 588 kg/m ³

6. Dry particle size: around 200 mesh

7. Heat source: 380V 50HZ

12. Environment: 20 ℃ 744.46mmHg with a diameter of 80%