Hach Hash Amtax SC Ammonia Nitrogen Online Analyzer

Brand: HACH Hash
Manufacturer: Hach Hash

·Typical applications:
Suitable for drinking water/surface water/industrial production process water
/Detection of ammonia nitrogen concentration in sewage treatment process and monitoring of ammonia nitrogen concentration at wastewater discharge outlet

Instrument features:
● Wide measurement range, with three ranges to choose from
● Can adapt to the requirements of different types of wastewater
● Fast response time
The reagent can be used for at least 3 months with extremely low operating costs
● Equipped with automatic cleaning and calibration functions
● Plug and play fully functional digital controller
The minimum detection limit should be 0.05mg/L, NH4-N
The analyzer has a self diagnostic system
● Optional advanced sampling preprocessing system

Measurement principle:
Measurement of ammonia ion concentration using gas sensitive electrodes

Technical parameters:

	low concentration range	Medium concentration range	high concentration range
Measurement range (NH4-N)	0.05~20 mg/L	1~100 mg/L	10~1000 mg/L
LoD	0.05 mg/L	1 mg/L	10 mg/L
accuracy	3% ±0.05 mg/L	3% ±1.0 mg/L	4.5% ±10 mg/L
reproducibility	2% ±0.05 mg/L	2% ±1.0 mg/L	2% ±10 mg/L

Response time: T90 ≤ 5 minutes
Measurement interval: adjustable from 5 to 120 minutes
Sample conditions: Temperature: 4-40 ℃, pH：5-9
Operating conditions: Temperature: -20-45 ℃ Humidity: Relative humidity 95% Non condensing
Power requirements: 230VAc/50Hz or 115 VAc/50-60Hz;
Data transmission: SC1000 multi parameter universal controller with data cable
Output via relay, current output, and bus interface of sc1000 multi parameter universal controller
Shell characteristics: Meets the UV protection requirements of the American Standards Institute, can lock the shell, and has a protection standard of IP66
Sample filtration: Obtain continuous samples (approximately 500-1000ml/min) using a Filterprobe sc (as described below) or FILTRAX, ultrafiltration, etc
Outer box size: 540 × 720 × 390 mm
Cable length: 2 meters from the outer shell
Instrument weight: 35 kilograms (including reagents)
Power supply: Heat the hose with a filter probe of 5 or 10 meters, using an analyzer with 100 watts (transient peak power consumption: 1000 volt amperes).
Sample flow rate: maximum 3 meters per second
Filtration rate: At least 4 minutes out of every 5 minutes reach 5 milliliters per minute
Outer box size: 315 × 250 × 120 millimeters