Hans Rudolph non diffusive gas collection bag, Hans Rudolph non diffusive airbag

NegotiableUpdate on 01/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HansRudolph non diffusion gas collection bag, HansRudolph non diffusion airbag, non diffusion airbag comes in standard sizes of 5, 15, 30, 60, 100, and 170 liters

Product Details

Hans Rudolph non diffusion gas collection bag, Hans Rudolph non diffusion airbag, non diffusion airbag comes in standard sizes of 5, 15, 30, 60, 100, and 170 liters. Custom sizes can be provided upon request. The bag is a flat type with heat sealed edges. The bag has a main bulk head port for directional valve attachments and an on/off hose hook valve for filling and sampling. The bag material is multi-layer inert plastic film with aluminum foil in the middle.

Hans Rudolph non diffusion gas collection bag, Hans Rudolph non diffusion airbag can provide six standard bag sizes and customized sizes according to requirements.

Multi layer polyethylene thermoplastic laminated board with aluminum foil center layer.

Intended to eliminate or reduce the infiltration of bags in and out.

The aluminum foil layer serves as a total barrier.

The innermost layer of polyethylene inert layer can prevent chemical reactions with gas components and will not undergo any degree of absorption or adsorption.

Excellent oxygen and moisture barrier material.

Bag size 35mm ID Oring main bag adapter (PBA) with two female Ruhr samplers

Port. PBA is the connection with the respiratory system. Provide customized adapters.

The bagged On Of 6.3mm hose hook valve is used for filling and emptying.

Install grommets for hanging bag components.

Provide a plan for replacing and rebuilding bag laminates.

Hans Rudolph non diffusive gas collection bag, Hans Rudolph non diffusive airbag specifications:

material
Bag laminated board	5-layer polyethylene (PE) with aluminum (AL) foil as the central layer
Main Bag Adapter (PBA)	Thermoplastic polyester (PET)
Hose hook valve	Thermoplastic polycarbonate (PC)
Sealing rings and gaskets	Chloroprene rubber (chloroprene) synthetic rubber
washer	Thermoplastic polyamide (PA, nylon)
sampling port	Thermoplastic polyamide (PA, nylon)
grommet	brass
pipeline	silicone rubber

Non diffusive airbags are intended to be used as scientific tools or components, and are an important component of life science applications in educational and research environments. Non diffusion airbags should be used under the supervision of qualified personnel

Hans Rudolph non diffusive gas collection bag, Hans Rudolph non diffusive airbag physical properties:

Main Bag Adapter (PBA): 35 mm inner diameter Oring (2) sliding sealing feet for fitting with 35 mm outer diameter ports. have

Two internal thread Luer sampling ports, one directly samples from PBA, and the other connects to a 1.6mm ID tube from the bag component

Collect samples at the central location. On Off hose hook valve: The hook end thread enters and exits the valve body, used for opening and closing

(Close) Control. The inverted hook used for connecting 6.3mm ID tubes can be used for ashing the contents of filling or vacuuming bags.

Bag laminated board: 5-layer inert polyethylene thermoplastic laminated board with aluminum foil center layer, nominal thickness of 4 mil, excellent oxygen and moisture resistance

Gas barrier and heat resistance can be sealed.

Designed to block gas infiltration and leakage from the bag. The majority of inert inner layers (PE) reduce the possibility of chemical reactions with gas components.

Non diffusion airbag

Non diffusion airbags come in standard sizes of 5, 15, 30, 60, 100, and 170 liters.Custom sizes can be provided upon request.The bag is a flat type with heat sealed edges.The bag has a main bulk head port for directional valve attachments and an on/off hose hook valve for filling and sampling.The bag material is multi-layer inert plastic film with aluminum foil in the middle.