High speed Band Aid Packaging Machine Manufacturer

Manufacturer of high-speed band aid packaging machine $nDC series high-speed band aid packaging machine computer version high-speed fully automatic band aid production line. Production speed: 2000 pieces per minute. Fully padded with medicinal cotton.

　　DC SeriesHigh speed adhesive tape packaging machine

1. Each feeding system of this equipment is equipped with an electric eye. When the materials are exhausted, it can automatically shut down and emit a warning sound to reduce the production of defective products.

2. Due to its fast production speed, this equipment is equipped with a second material feeding system to facilitate quick material replacement when materials are exhausted. Another backup material can be installed simultaneously with equipment production.

3. Using 6 sets of magnetic powder clutches and 7 sets of Loadcell detectors can stabilize the tension of each material during production feeding.

4. In terms of control, this device adopts a 10 inch color human-machine interface, which can be easily adjusted and set at a glance, and the operation is simple.

5. This equipment uses multiple sets of servo motors, ensuring precise alignment during product production and easy conversion of size specifications; Replacing the time-consuming process of mechanically changing specifications.

The DC-306Ni high-speed band aid packaging machine uses rolling cutting technology for cutting and slicing, replacing the traditional low-speed slicing and punching method. Therefore, the speed can reach 20M per minute, and for a 19 x 72mm adhesive tape, it can take up to 1000 pieces per minute.

　　High speed adhesive tape packaging machineMaintenance and Precautions

1、 Before use:

1. Before using the punching machine, it is necessary to check whether there are any debris at the punch and lower die blade. (If necessary, it must be cleaned thoroughly before use)

2. Add lubricating oil to the upper part of the punch (the movable part of the punch).

2、 When in use:

1. When the punching machine continues to work, ensure that the oil filling area of the punching machine is not short of oil.

2. If there is any abnormal noise during use (abnormal noise when the punching machine is working), please handle it in a timely manner.

3. Do not use iron tools to strike any part of the punching machine during installation.

4. Suggested air pressure: 3-5KGCM

3、 After use:

1. After use, first wipe the punching machine clean, mainly the punch and lower die position.

2. Add lubricating oil to the punch and lower die, and press the punch down to the lowest position to better protect the punching machine.

Automatic punching machine

An automated equipment driven by a motor to process holes in metal materials. There are several types of machines, including automatic drilling machines, automatic reaming machines, and automatic milling machines.