Integrated refrigeration, heating, and temperature control unit for pharmaceutical industry

1、 Product Introduction

　　Integrated refrigeration, heating, and temperature control unit for pharmaceutical industryIt is an integrated temperature controller that can both cool and heat. Depending on the actual temperature control requirements, it can use media such as ethylene glycol or silicone oil. According to the cooling method, there are air-cooled and water-cooled types, and according to the requirements of the usage environment, there are explosion-proof and anti-corrosion types.

2、 Product images

3、 Application scope

Applied to glass reaction vessels, metal reaction vessels, and bioreactors for temperature control, especially suitable for controlling processes that require heat and release during the reaction. A special device for accurate temperature control in the chemical and pharmaceutical industry, used to meet the temperature control of intermittent reactors or the heating and cooling, constant temperature system of continuous process.

Parameter performance is also crucial, and customers need to carefully choose according to their own operating conditions to avoid cost increases caused by improper selection.

4、 Precautions for use

When selecting a thermal conductive medium for the refrigeration, heating, and temperature control integrated unit used in the pharmaceutical industry, attention should be paid to whether its temperature upper and lower limits, ignition point, viscosity, freezing point, etc. meet the requirements, and whether they are suitable for the use of internal pipelines in the instrument;

When selecting a heat transfer medium tube for the refrigeration, heating, and temperature control integrated unit used in the pharmaceutical industry, the length should be as short as possible and the diameter should be as large as possible. If the diameter is too small, it may cause current limitation;

3. Do not use water as a heat transfer medium when the temperature of the refrigeration, heating, and temperature control integrated unit used in the pharmaceutical industry is above 100 degrees;

4. Do not knot the heat transfer medium pipeline of the integrated refrigeration, heating, and temperature control unit used in the pharmaceutical industry;

5. Regularly inspect the heat transfer medium pipes of the refrigeration, heating, and temperature control integrated unit used in the pharmaceutical industry to prevent material damage (such as fission);

6. Warning: To avoid damaging the pipelines of the refrigeration, heating, and temperature control integrated unit used in the pharmaceutical industry, please regularly use water treatment chemicals to clean the pipeline dirt when using water with high mineral content.