LYT 1255-1999 Standard Soil Total Sulfur Determination Equipment

LYT 1255-1999 Standard Soil Total Sulfur Determination EquipmentProduct Introduction:

The energy-saving programmable tube furnace SK3-2.5-13 is a high-temperature experimental equipment. Adopting high-quality and ultra light energy-saving ceramic fiber inner liner, it is energy-saving and efficient, with energy consumption only half of ordinary tube furnaces. The high-temperature furnace adopts a new material for oxidation prevention and insulation, with a high temperature of 1400 degrees. The furnace wire is bonded continuously, and the service life is more than 5 times that of ordinary furnace wire and silicon carbon rod. The insulation layer is fiber cotton blanket and metal shell.

The controller is located below the furnace body and is made in an integrated manner. The electrical connection between the furnace body and the temperature controller is completed before leaving the factory. It can be used by turning on the power supply. The control system uses LTDE programmable instruments with adjustable heating speed, and the PID+SSR system synchronizes and coordinates control, making it possible for any experiment or experiment to be accurate and reproducible. It has automatic constant temperature and time control functions, and is equipped with a second level over temperature automatic protection function, ensuring reliable control and safe use.

LYT 1255-1999 Standard Soil Total Sulfur Determination EquipmentTechnical parameters:

Temperature range: 100~1300 ℃

Volatility: ± 1 ℃

Display accuracy: 1 ℃

Furnace size: φ 22 × 380MM

Heating area: 280mm

Outer diameter of furnace tube: φ22MM

Heating rate: ≤ 50℃/min； (Adjustable to any speed below 50 degrees per minute)

Whole machine power: 2.5KW

Power supply: 220V, 50Hz

◆ Furnace structure and materials:

Furnace shell material: The outer box is made of high-quality cold plate treated with phosphate film salt and sprayed with high-temperature plastic, with a color of computer gray;

Furnace core material: Made of high radiation, low heat storage, ultra lightweight fiber furnace plates assembled on six sides, resistant to rapid cooling and heating, energy-saving and efficient;

Insulation method: fiber cotton blanket;

Temperature measuring port: thermocouple enters from below the furnace body;

Terminal post: The heating furnace wire terminal post is located below the furnace body;

Furnace bracket: made of angle steel frame metal panel, built-in control system and compensation wire, located below the furnace body

Heating element: High temperature insulation resistance wire generates heat;

Whole machine weight: approximately 22KG

Standard packaging: wooden crate

◆Temperature control system:

Temperature measurement: S-division platinum rhodium platinum thermocouple;

Control system: LTDE fully automatic programmable instrument, PID regulation, control accuracy of 1 ℃

Complete set of electrical appliances: using branded contactors, cooling fans, and solid-state relays

Time system: can set the heating time, control the constant temperature time, and automatically stop the machine when the constant temperature time is reached;

Overtemperature protection: built-in secondary overtemperature protection device, dual insurance;

Operation mode: Full range adjustable constant temperature, constant operation; Program running.