Laboratory organic solvent spray dryer price

BA-PWGZ3000 organic solvent spray dryer and it is mainly applicable to universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro particle powders. It has broad spectrum applicability to all solutions, such as emulsion and suspension, and is suitable for drying heat sensitive substances, such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed materials are only exposed to high temperature when sprayed into aerosol particles, they are only heated instantaneously, which can keep the active ingredients of these active materials intact after drying.

1. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency.

2. Full automatic control: one button startup, after setting spray process parameters, the temperature reaches the preset temperature, the peristaltic pump starts automatically, the touch screen displays the running animation, and the running process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.

3. Manual control: If it is necessary to adjust the process parameters during the experiment, it can be easily switched to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation)

4. Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted.

5. Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).

6. The spray, drying and collection system is made of transparent high borosilicate heat-resistant glass materials, so that the drying process can be carried out in a pollution-free environment.

7. Equipped with an oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and very low noise, less than 60db.

8. The atomization structure of two fluid spray is made of stainless steel, with compact design and no auxiliary equipment.

9. The design of drying temperature control adopts real-time PID constant temperature control technology, which enables accurate temperature control in the entire temperature range and heating temperature control accuracy of ± 1 ℃.

To maintain the purity of the sample, an air inlet filter is equipped.

11. The feeding amount can be adjusted by the feeding peristaltic pump, and the small sample volume can reach 50ml.

After drying, the finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.

13. For viscous materials, a nozzle cleaner (through needle) is installed, which will automatically clear the nozzle when it is blocked, and the frequency of the through needle can be automatically adjusted.

The upgraded atomization system effectively solves the problem of certain viscous materials adhering in the cyclone separator. Causing long-term accumulation of materials in the cyclone separator.

1. The organic solvent spray dryer adopts the dual control mode of full automatic control and manual control, and the whole experiment process is dynamically displayed on the color touch screen (animation)

2. Inlet air temperature control: 30 ℃~300 ℃

3. Air outlet temperature control: 30 ℃~200 ℃

4. Large feed rate: The peristaltic pump can be adjusted up to 1500ml/h

5. Small feed volume: 50mL

6. Real time PID temperature control technology, real-time online display of inlet and outlet air temperatures, with a temperature control accuracy of ± 0.5 ℃

7. Drying time: 0.8-1.0 seconds

8. The machine has a misoperation protection function. When the fan and heater switches are used in the wrong order, the machine automatically reminds to prevent beginners from accidentally operating and damaging the machine.

9. Hot air method: induced draft

10. Equipped with shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).

11. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency

12. Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements

13. Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted

The whole spray dryer is made of stainless steel, and the two fluid spray atomization structure. The spray, drying and collection system is made of transparent 304 stainless steel

16. Intelligent control system, replacing PLC control in the market, with strong stability

17. Time setting function: Users can set the working time of the machine themselves without manual supervision. When the working time ends, the machine stops working without manual supervision, saving valuable time for customers to conduct experiments.

18. Automatic stop function of fan: After the instrument finishes working, the fan should be kept in working state for the glass part to cool down. This machine is set through an intelligent program, and when the temperature drops below 30 degrees, the fan will automatically shut down without the need for manual shutdown.

19. Overall power: 3.5KW/220V

20. Tower wall blowing device with high material yield

21. spray head cooling device (optional)

22. A sealed nitrogen circulation system ensures the safe evaporation of organic solvents.

23. Equipment dimensions: 1300mm (height) x 770mm (length) x 590mm (width)