Laboratory small spray dryer Stainless steel glass drying tower

Laboratory small spray dryer Stainless steel glass drying tower

Introduction of Small High Temperature spray Dryer

Our small high-temperature spray dryer adopts full automatic and manual dual control mode, and the color LCD touch screen displays key parameters in real time. The process can be started with one key, which is convenient and efficient. It is equipped with real-time PID constant temperature control technology, with a temperature control accuracy of ± 0.5 ℃. The inlet air temperature can be adjusted between room temperature and 250 ℃, and combined with a 0.8-1.0 second instantaneous drying process, it can maximize the retention of active ingredients in thermosensitive materials such as biological products and enzyme preparations.

The equipment innovation adopts a fully stainless steel body and a high borosilicate heat-resistant glass drying system, which combines corrosion resistance and visualization advantages. It is equipped with a tower wall blowing device and an air inlet filter, ensuring sample purity and improving material recovery rate. The built-in oil-free air compressor has a noise level of less than 60db, with multiple nozzle specifications to choose from. It also supports non-standard customization to meet the feeding requirements of 50-1500ml/h, providing flexible support for scientific research and production.

Main features

1. The small spray dryer in the laboratory is operated with a large color touch screen, and the full automatic control and manual control are combined

2. Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).

3. Full automatic control: one button startup, after setting spray process parameters, the temperature reaches the preset temperature, the peristaltic pump starts automatically, the touch screen displays the running animation, and the running process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.

4. The spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass materials, so that the drying process can be carried out in a pollution-free environment.

5. Manual control: If the process parameters are adjusted during the experiment, it is convenient to switch to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation)

6. The atomization structure of two fluid spray, the whole machine is made of high-quality stainless steel materials, and the design is compact without auxiliary equipment.

7. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and low noise, less than 60db, meeting laboratory noise standards;

8. The design of dry temperature control adopts real-time PID constant temperature control technology, which enables accurate temperature control in the entire temperature range and heating temperature control accuracy of ± 1 ℃.

9. Equipped with a nozzle cleaner (needle), it will automatically clear when the nozzle is blocked, and the frequency of needle passing can be automatically adjusted.

10. In order to maintain the purity of the sample, an air inlet filter is equipped.

11. The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.

12. The feeding amount can be adjusted by the feeding peristaltic pump, and the sample volume can reach 50-2000ml.

13. Imported nozzle with high efficiency. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency.

14. For viscous materials, the small spray dryer is equipped with a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of through needle can be automatically adjusted;

15. Innovative tower wall blowing device with higher material recovery rate.

Laboratory small spray dryer Stainless steel glass drying tower

Technical Specifications:

1. Inlet air temperature control: room temperature~250 ℃

2. Air outlet temperature control: room temperature~140 ℃

3. Evaporation water volume: 1500mL/H~2000ml/h

4. Feed rate: 50-1500ml/h

5. Feeding method: peristaltic pump adjustment

6. Real time PID temperature control technology, real-time online display of inlet and outlet air temperature, temperature control accuracy ± 0.5 ℃

7. Average drying time: 0.8-1.0 seconds

8. Whole machine power: 4.5KW/220V

9. Dimensions: 1400mm (height) x 810mm (length) x 620mm (width)

10. Nozzle diameter: 0.5mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements

11. Double control mode of full automatic control and manual control of spray dryer, dynamic display (animation) of color touch screen throughout the experiment

12. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency

13. Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted

14. The whole spray dryer is made of stainless steel, and the atomization structure of two fluid spray is adopted. The spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass materials

15. Other requirements can be customized according to customer requirements

16. Equipment weight: 85KG