Manual rapid freeze-thaw test chamber manufacturer

Manual rapid freeze-thaw test chamber manufacturer

Product Features:

Key components *, high quality and high performance;

During full load operation, the temperature difference at each point inside the freeze-thaw box shall not exceed 2 ℃;

Microcomputer automatic control, real-time dynamic display of data curves, automatic storage of test data, automatic memory of unexpected test termination, and fault troubleshooting

Characteristics of automatic recovery and the ability to continue the experiment; Easy installation, small footprint, and low noise;

Main technical parameters of manual rapid freeze-thaw test chamber:

1. Freeze thaw cycle: Complete one cycle every 2-4 hours, with no less than 1/4 of the freeze thaw cycle time used for melting.

2. At the end of freezing and melting, the center temperature of the specimen can be adjusted to -18 ℃± 2 ℃ and 5 ℃± 2 ℃, respectively.

3. The freeze-thaw chamber can hold 28/16/10 pieces of 100 × 100 × 400 specimens, one of which is a center temperature measurement specimen.

4. There are three temperature collection points in the rapid freeze-thaw test chamber: center temperature, monitoring temperature, and control temperature. It should achieve the purpose of central temperature control, liquid temperature setting, and diagonal temperature monitoring.

Power supply: three-phase four wire system 380V; maximum power 5kw/3.5KW/3KW

Standard configuration: 1 indoor and 1 outdoor unit; 4 temperature sensors; 120 liters of antifreeze; One software CD; Rubber drums 28/16/10 pieces.

Model, specimen capacity, required antifreeze, peak power, indoor length * width * height, outdoor length * width * height
JDR-28 28 pieces, 120 liters, 5kw, 1250 * 720 * 700mm, 1950 * 980 * 980
JDR-16 16 piece 80 liter 3.5kw 770 * 720 * 700mm 1450 * 980 * 980
JDR-10 10 pieces, 60 liters, 2.8KW, 500 * 900 * 700mm, 900 * 600 * 500mm

Manual rapid freeze-thaw test chamber manufacturer

Jinyou Company's main products include: constant temperature and humidity testing machines, drug stability testing chambers, blast drying chambers, condensate testing chambers, cold and hot shock testing machines, walk-in constant temperature and humidity testing chambers, temperature and humidity vibration three comprehensive testing chambers, aging testing chambers, salt spray testing chambers, ultraviolet weather resistance testing machines, xenon lamp weather resistance testing chambers, sand and dust testing chambers, rain testing chambers, ozone aging testing chambers, and other environmental testing instruments and equipment, totaling dozens of series and nearly a hundred products. These advanced technology experimental equipment are widely used in high-tech fields such as aerospace, aviation, weapons, ships, electronics, communication, petrochemicals, as well as universities and research institutions in China. The company can also tailor and professionally design various non-standard testing equipment for customers.