Multi functional long tube dryer

NegotiableUpdate on 07/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A multifunctional long tube dryer is a type of dryer that processes large amounts of materials. Due to its reliable operation, high operational flexibility, strong adaptability, and large processing capacity, it is suitable for the metallurgical, building materials, food, light industry, chemical, coal, pharmaceutical and mining industries. Multi functional long tube dryer is generally suitable for powder and granular materials, and can also be used to dry sticky paste like materials or materials with high moisture content by partially adding materials. His advantages are high production capacity, wide applicability, low flow resistance, large allowable fluctuation range in operation, and convenient operation.

Product Details

Detailed Introduction

1、 Purpose:

Multi functional long tube dryerIt is a dryer that processes a large amount of materials. Due to its reliable operation, high operational flexibility, strong adaptability, and large processing capacity, it is used in metallurgy, building materials, food, light industry, chemical industry, coal, pharmaceutical and mining industries.

Rotary drum dryers are generally suitable for powder and granular materials, and can also be used to dry sticky paste like materials or materials with high moisture content by partially adding materials. His advantages are high production capacity, wide applicability, low flow resistance, large allowable fluctuation range in operation, and convenient operation.

2、 Structure and Principle
1. Structure:

Multi functional long tube dryercause1Cylinder body;2Front roller ring;3Rear roller ring;4Gear;5, blocking roller;6Dragging roller;7Small gear;8Discharge section;9; Yangban;10Reducer;11Motor;12. Hot air duct, 13, feeding chute; 14. The furnace body and other components can also be designed according to user needs, including gas generators, combustion chambers, or supporting elevators, belt conveyors, quantitative feeders, cyclone dust collectors, induced draft fans, etc.

2Multi functional long tube dryerworking principle:

Dry and wet materials are transported to the hopper by a belt conveyor or bucket elevator, and then enter the feeding end through the feeding pipeline through the feeding machine of the hopper. The slope of the feeding pipeline should be greater than the natural inclination angle of the material, so that the material can flow smoothly into the dryer. The dryer cylinder is a rotating cylinder slightly inclined from the horizontal line. The material is added from the higher end, and the heat carrier enters from the lower end, coming into counter current contact with the material. There are also cases where the heat carrier and the material flow together into the cylinder. As the cylinder rotates, the material moves to the lower end under the action of gravity. During the forward movement of the wet material inside the cylinder, it directly or indirectly receives heat from the heat carrier, allowing the wet material to dry, and then is sent out through a belt conveyor or screw conveyor at the discharge end. There is a copying plate installed on the inner wall of the cylinder, which is used to pick up and sprinkle the material, increase the contact surface between the material and the airflow, improve the drying rate, and promote the advancement of the material. Thermal carriers are generally divided into hot air, flue gas, etc. After passing through the dryer, the heat carrier generally needs a cyclone dust collector to capture the materials carried in the gas. If further reduction of exhaust dust content is required, it should be discharged after passing through a bag filter or wet dust collector.

typename	Drum diameter (mm)	Drum length (m)	tilt (o)	rotational speed (r/min)	weight (t)	power (kw)	volume (m3)
Ф0.6×8	Ф600	8	3-5	8	5.1	4	2.26
Ф0.8×10	Ф800	10	3-5	7.2	6.9	4	5.02
Ф1.0×10	Ф1000	10	3-5	6.73	7.5	5.5	7.85
Ф1.2×12	Ф1200	12	3-5	5.8	13.1	11	13.31
Ф1.5×12	Ф1500	12	3-5	4.8	22.3	15	21.2
Ф1.8×14	Ф1800	14	3-5	3.2	45.8	30	48.22
Ф2.2×1.8	Ф2200	18	3-5	3	50.3	37	70.43
Ф2.4×20	Ф2400	20	3-5	2.83	78.4	45	90.43
Ф2.8×24	Ф2800	24	3-5	2.59	97	75	147.8
Ф3.0×20	Ф3000	20	3-5	2.6	102	55	141.3
Ф3.0×25	Ф3000	25	3-5	2.6	110	75	176.7

Pre sales service:

The company will send engineering and technical personnel to the site to plan the site for users, design production processes and plans, and train technical operators for you;

In sales service:

Accompany you to complete the acceptance of the equipment, assist in drafting construction plans and detailed procedures;

after-sale service:

The company will assign professional technicians to the site to guide customers in installing, debugging, and planning equipment management.

After the installation and debugging are completed, the company's customer service and after-sales personnel will conduct regular follow-up visits to customers, make detailed records of the equipment usage, and forward them to the technical department. At the same time, they will provide professional answers to all problems encountered by customers during the use of the equipment!