QG-200 airflow dryer

NegotiableUpdate on 02/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

QG-200 airflow dryer: The entire system is equipped with 2-point temperature measurement (inlet temperature, outlet temperature 0-220 ℃), temperature display, inlet temperature control, and outlet temperature setting for over temperature alarm.

Product Details

“QG-200 airflow dryer

　　Calculation of material selection for sodium metabisulfite airflow dryer:

1. Material name: Sodium metabisulfite

2. Production capacity: 2000kg/h

3. Initial moisture content: 5% (wet basis)

4. Final moisture content: 0.5% (wet basis)

5. Specific gravity: 1.1~1.3;

6. Dry particle size: 180~70 mesh

7. Heat source: User provided 200 ℃ (500pa)

8. Dust removal system: primary cyclone dust collector+secondary cyclone dust collector

9. Equipment material: Material contact part 304

10. Installation: Indoor

11. Power supply: 380V 50HZ

12. Environment: 14 ℃ 760mmHg with a diameter of 80%

　　Electrical control requirements for "sodium metabisulfite" airflow dryer

1. Electrical appliances: Electrical appliances are directly or indirectly started, centrally controlled, and DCS interfaces are reserved.

2. Instrument: power control display; Operation indicator light display; Mixing and feeding screw current displayed separately

3. The entire system of the "sodium metabisulfite" airflow dryer is equipped with two-point temperature measurement (inlet temperature, outlet temperature 0-220 ℃), temperature display, inlet temperature control, and outlet temperature setting for over temperature alarm.

4. Two point pressure measurement: inlet and outlet of the main unit;

5. The feeder is variable frequency speed controlled and the feeding amount is automatically controlled.

6. There are interlocking requirements for the opening of the cooling oil pump and the mixer. The mixing and feeding are interlocked, and the rotating motor is turned on before the feeding dragon, and the feeding dragon is turned off before the rotating motor.

7. All motors are centrally controlled, and the induced draft fan is frequency controlled