Road condition detector

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The road condition detector adopts remote sensing technology to avoid damage to the road, thus avoiding interference with traffic caused by the installation of road weather stations. Remote sensing installation in road conditions where embedded road sensors are inconvenient or impossible to install means that there is no need to close the road or cut the road surface, and the installation work is both safe and convenient. Low maintenance is an ideal choice for the composition of road meteorological systems.

Product Details

Detailed product introduction and technical parameters

1、 Product Introduction

Road condition detectorThe use of remote sensing technology avoids damage to roads, thus avoiding interference with traffic caused by the installation of road weather stations.

In road conditions where embedded road sensors are inconvenient or cannot be installed, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is both safe and convenient. Low maintenance is an ideal choice for the composition of road meteorological systems.

It can be installed on existing weather stations or on other buildings with unobstructed road views.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow, and standing water on road surfaces.

By providing road condition information, accurate monitoring data can be provided to road management departments to take response measures before road safety hazards occur.

路面状况检测仪

2、 System composition: road condition sensor, collector, pole bracket, power supply system, cloud platform

3、 Product application

1. Remote installation of bridge deck

2. Accident prone areas

3. Areas with high traffic volume

3. Areas with frequent rain and snow

4Road condition detectorProduct Features

1. Remote measurement of road area for water, ice, and snow

2. Measure the road surface condition

3. Measure water accumulation, ice surface, and slippery conditions

4. Non embedded design

5. Corrosion resistance

6. Infrared detection up to 15 meters away

7. No need to close the lane, simple installation and maintenance

8. Sturdy design, all-weather measurement

5、 Technical parameters

Monitoring distance	2-15 meters
Detecting diameter	23cm
angle	30-90 degrees
power input	220VAC、24VDC
Maximum power consumption	5W (including lens heating)
Operating Temperature	-38 º C to+70 º C
Operating Humidity	Degree 0 to 100%
Output of road condition parameters	Thickness of accumulated water on the road surface: 0.00-10mm	Resolution: 0.01mm	Accuracy: 0.1mm
	Road icing thickness: 0.00-10mm
	Road area snow thickness: 0.00-10mm
	Road surface smoothness: 0.00-1	Resolution: 0.01
	(*) Road surface temperature: -38 º C to+60 º C
	(*) Road humidity: 0-100%
	(*) Environmental temperature and humidity: -40 º C to+70 º C
	(*) Atmospheric pressure: 150-1100 hPa
Road condition report	Dry, damp, wet, snow, ice, mixed with ice water (* frost)
Lens contamination detection	Measurement of pollution level of optical lenses and automatic internal pollution compensation
Road surface materials	Concrete and asphalt pavement
communication	RS485、RS232
Average W faults	10 years
safety	No safety issues - Infrared remote sensing measurement technology