- Phone
-
Address
B3 Floor, Wuhan University Science and Technology Park, Daxueyuan Road, Donghu New Technology Development Zone, Wuhan City
Product Categories
Wuhan Zhongyi Baikong Instrument Co., Ltd
SS570 turbidity meter
NegotiableUpdate on 04/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Zhongyi Baikong Instrument Co., Ltd. focuses on the practice of automation control technology and has provided reliable detection instruments for online analysis, level, flow, pressure and other aspects of liquids for many years.
Product Details
Zhongyi Baikong Instrument Co., Ltd. focuses on the practice of automation control technology and has provided reliable detection instruments for online analysis, level, flow, pressure and other aspects of liquids for many years.
A complete turbidity measurement system includes transmitters, sensors, and sensor mounting brackets.
The SS570 Chinese turbidity meter is a newly developed turbidity meter. The transmitter is a highly intelligent continuous monitoring instrument with a color screen display. It can output 4-20mA analog signals, upper and lower limit alarm control signals, RS485 digital communication, and display parameters such as temperature, turbidity, time, and status. It can be widely used for continuous measurement of turbidity in various water quality industries such as power, chemical, environmental protection, medicine, and food.
The transmitter is used to display the data measured by the sensor and can be connected to a digital signal sensor or an analog signal sensor. Users can configure and calibrate the transmitter through its interface4-20mAAnalog output. It can achieve functions such as relay control and digital communication.
The instrument should be installed indoors or in a location with protective devices, and flammable and explosive materials should not be placed around it. The installation location of the instrument should be chosen in a place that is easy for users and installation and maintenance personnel to read the instrument nameplate, and is convenient for use, maintenance, and repair.
All power and pipeline connections must comply with national and local standards. The front end of the instrument power supply must be equipped with an insulation switch or a circuit breaker.
For safety and to avoid interference from external signals on the instrument, the power cord of the instrument should be connected to a socket with corresponding specifications, ground wire markings, and electrical standards, and the ground wire must be well grounded.
The internal circuit of the instrument can be found in the wiring diagram, and the rated values of voltage and power can be found on the nameplate of the product. The user's power supply capacity must meet the requirements for normal use of the instrument.
Avoid direct sunlight and vibration of the transmitter;
The transmitter should be installed slightly above the operator's head up position for easy viewing of the panel or control operations; Leave sufficient space for the opening and maintenance of the transmitter enclosure.
