SX3-3-11 Ceramic Fiber Muffle Furnace 1100 ° C High Temperature Furnace

Ceramic fiber muffle furnace 1100 degree high temperature furnaceDetailed Introduction

Ceramic fiber muffle furnace 1100 degree high temperature furnacePerformance characteristics:

Fast heating rate, can reach 1000 ℃ within 20 minutes

High precision, with an error of "0" at a high temperature of 1000 degrees

■ Integrated production, no installation required, can be used by connecting the power supply

The control system adopts LTDE technology, with 30 band programmable function and secondary over temperature protection.

The weight is 70% lighter than traditional electric furnaces, the appearance is small, the workshop size is large, and the same external size is 50% larger than the working size of traditional electric furnaces

This ceramic fiber muffle furnace solves the tedious preparation work of installation, connection, and debugging. Simply connect the power supply to start working. The furnace chamber is made of ultra lightweight materials, which are one-fifth of the original weight, and the heating rate is three times that of the original (adjustable speed). The control system adopts LTDE technology, fully automatic intelligent control, with 30 segment programming, curve heating, automatic constant temperature, automatic shutdown, PID+SSR system synchronous coordinated control, making it possible for any experiment or experiment to be accurate and reproducible. It has automatic constant temperature and time control functions, and is equipped with a second level over temperature automatic protection function. The control is reliable and safe to use. The controller is located under the box and is integrated. The electrical connection between the furnace body and the temperature controller has been completed before leaving the factory. It can be used when the power is turned on. It is an ideal high-temperature furnace for colleges, research institutions, industrial and mining enterprises, and laboratories

Detailed information:

Furnace structure and materials used
Furnace shell material: The outer box shell is made of high-quality cold plate treated with phosphate film salt and sprayed with high-temperature plastic, with a color of computer gray;
Furnace core material: Made of high radiation, low heat storage, ultra lightweight fiber furnace plates assembled on six sides, resistant to rapid cooling and heating, energy-saving and efficient;
Insulation method: air cooling;
Temperature measuring port: The thermocouple enters from the upper back of the furnace body;
Terminal post: The heating furnace wire terminal post is located at the lower rear position of the furnace body;
Controller: located below the furnace body, with a built-in control system and compensation wires connected to the furnace body
Heating element: High temperature resistance wire;
Whole machine weight: approximately 32KG
Standard packaging: wooden crate

Technical Parameter
Temperature range: 100~1100 ℃;
Volatility: ± 1 ℃;
Display accuracy: 1 ℃;
Furnace size: 300 × 200 × 150MM
Dimensions: 580 × 360 × 520 MM
Heating rate: ≤ 50 ℃/min; (Adjustable to any speed below 50 degrees per minute)
Overall power: 3KW;
Power supply: 220V, 50Hz

Temperature controller
Temperature measurement: K-scale nickel chromium nickel silicon thermocouple;
Control system: LTDE fully automatic programmable instrument, PID regulation, display accuracy of 1 ℃
Complete set of electrical appliances: using branded contactors, cooling fans, and solid-state relays;
Time system: can set the heating time, control the constant temperature time, and automatically stop the machine when the constant temperature time is reached;
Overtemperature protection: Built in secondary overtemperature protection device with dual insurance.;
Operation mode: Full range adjustable constant temperature, constant operation; Program running.

Technical documentation and attachments provided
Operating Instructions
Warranty Card

Main components
LTDE programmable control instrument
Solid state relay
Intermediate relay
thermocouple
Cooling motor
High temperature heating wire

after-sale service:
Responsible for providing remote technical guidance to users
Timely provision of spare parts and accessories for equipment
Provide technical consultation and support during the use of equipment
Immediate response within 8 working hours upon receiving customer fault notification

Comparison Table of Technical Parameters for the Same Series (Ceramic Fiber Muffle Furnace)