SX3-4-11200 degree ceramic fiber muffle furnace

This energy-saving fiber resistance furnace (ceramic fiber muffle furnace) solves the tedious preparation work of installation, connection, and commissioning of the original energy-saving fiber resistance furnace. Simply connect the power supply to start working. The furnace chamber is made of ultra lightweight materials, and the heating speed is three times that of the original energy-saving fiber resistance furnace (adjustable speed). The control system adopts LTDE technology, fully automatic intelligent control, with 30 segment programming, curve heating, automatic constant temperature, automatic shutdown, and PID function to ensure the correct temperature at a certain point. It is an ideal high-temperature furnace for colleges, research institutions, industrial and mining enterprises, and laboratories.

1200 degree ceramic fiber muffle furnacePerformance characteristics:

1. Fast heating rate, can reach 1000 ℃ within 20 minutes

2. High precision, with an error of "0" at a high temperature of 1000 degrees

3. Integrated production, no installation required, can be used by connecting the power supply

4. The control system adopts LTDE technology, with 30 band programmable function and secondary over temperature protection.

5. The weight is 70% lighter than traditional electric furnaces, the appearance is small, and the workshop size is large. The same external size is 50% larger than the working size of traditional electric furnaces

1200 degree ceramic fiber muffle furnaceDetailed information:

● Furnace structure and materials used

Furnace shell material: The outer box shell is made of high-quality cold plate treated with phosphate film salt and sprayed with high-temperature plastic, with a color of computer gray;

Furnace core material: Made of high radiation, low heat storage, ultra lightweight fiber furnace plates assembled on six sides, resistant to rapid cooling and heating, energy-saving and efficient;

Insulation method: air cooling;

Temperature measuring port: The thermocouple enters from the upper back of the furnace body;

Terminal post: The heating furnace wire terminal post is located at the lower rear position of the furnace body;

Controller: located below the furnace body, with a built-in control system and compensation wires connected to the furnace body

Heating element: High temperature resistance wire;

Whole machine weight: approximately 70KG

Standard packaging: wooden crate

●Technical Parameter

Temperature range: 100~1200 ℃;

Volatility: ± 1 ℃;

Display accuracy: 1 ℃;

Furnace size: 300 × 300 × 300 MM

Dimensions: 570 × 520 × 785 MM

Heating rate: ≤ 50 ℃/min; (Adjustable to any speed below 50 degrees per minute)

Whole machine power: 4KW;

Power supply: 220V, 50Hz

●Temperature controller

Temperature measurement: S-division platinum rhodium platinum thermocouple;

Control system: LTDE fully automatic programmable instrument, PID regulation, display accuracy of 1 ℃;

Complete set of electrical appliances: using branded contactors, cooling fans, and solid-state relays;

Time system: can set the heating time, control the constant temperature time, and automatically stop the machine when the constant temperature time is reached;

Overtemperature protection: built-in secondary overtemperature protection device, dual insurance;

Operation mode: Full range adjustable constant temperature, constant operation; Program running.

●Technical documentation and attachments provided

Operating Instructions

Warranty Card

Main components

LTDE programmable control instrument

Solid state relay

Intermediate relay

thermocouple

Cooling motor

High temperature heating wire

●after-sale service:

Responsible for providing remote technical guidance to users

Timely provision of spare parts and accessories for equipment

Provide technical consultation and support during the use of equipment

Immediate response within 8 working hours upon receiving customer fault notification

●Comparison Table of Technical Parameters for the Same Series of Energy saving Fiber Resistance Furnaces (Ceramic Fiber Muffle Furnaces):