Sealing Test Device - Overview

Sealing Test Device - Overview

The sealing of packaging materials is crucial in ensuring the quality and safety of drugs. In order to ensure that drugs are not contaminated or spoiled, a dedicated packaging bag sealing tester is particularly important.

Sealing test deviceIt is a device specifically designed to test the sealing performance of pharmaceutical packaging materials. It uses advanced negative pressure technology to efficiently and accurately test the sealing performance of packaging materials. It is suitable for various links such as pharmaceutical production, packaging, and quality inspection, and helps ensure the quality and safety of drugs. At the same time, the tester can also be used in industries such as food and chemical to test the sealing performance of various packaging materials.

Sealing test deviceNegative pressure is mainly generated through the following methods:

1. Equipped with a vacuum pump internally, it can quickly reduce the pressure in the testing chamber;

2. Equipped with pressure sensors to monitor pressure changes in the testing room in real time;

3. Combine sealed samples and vacuum pumps to test the sealing performance of packaging materials.

4. Through negative pressure, the tester can simulate the sealing performance challenges that drug packaging materials may face during actual storage and use in a short period of time, such as environmental factors such as temperature and humidity, as well as the impact of the drug itself on the packaging materials.

useSealing test deviceWhen doing so, the following steps should be followed:

1. Set test parameters: Based on the characteristics and requirements of the tested packaging material, set corresponding test parameters such as negative pressure time, pressure, etc;

2. Sample placement: Place the tested packaging material sample in the sample compartment of the tester;

3. Start the vacuum pump: Press the vacuum pump start button to start pumping and reduce the pressure in the testing chamber;

4. Observe pressure changes: Under the action of negative pressure, observe the numerical changes of the pressure sensor;

5. Record data: Record the numerical changes of pressure sensors and analyze the sealing performance of packaging materials;

6. End the test: After the set test time, turn off the vacuum pump and release the negative pressure state.

Sealing test deviceTechnical Specifications

Measurement range: 0-0.6MPa

Measurement accuracy ± 1%

Pressure holding time 1-9999s

Gas source interface: 8mm polyurethane pipe

Machine size 430mm × 330 × 170mm (length, width, height)

Weight 8Kg

Gas source pressure 0.4MPa~0.9MPa (provided by the gas source user)

Working temperature 15 ℃ -50 ℃

Relative humidity 80%, no condensation

Power supply 220V 50Hz

Sealing test deviceProduct Configuration

Standard configuration: Host, sealed bucket, micro printer, touch screen

Optional parts: pressure resistant bucket, testing rack, hose closure testing device, patency testing device

Sealing Test Device - Overview

This is an advertisement