Selling activated carbon deodorization equipment

NegotiableUpdate on 03/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The characteristics of selling activated carbon deodorization equipment are that it can adsorb and treat difficult gases such as nitrogen oxides, and can purify and treat multiple mixed acid gases simultaneously. The adsorption purification efficiency is high, the temperature adaptability is good, the operating cost is low, and the one-time addition of fillers can meet the long-term operation. The operation, management, and maintenance are simple, and no secondary pollution is generated during operation. Selling activated carbon deodorization equipment

Product Details

The product is a customized product, and the above quotation is a deposit

Working principle

Acidic waste gas is purified by the filter bed layer inside the stage (the packing is divided according to the acidic medium)YHI and YHII types, the exhaust gas is uniformly adsorbed through the packing material, and the treated exhaust gas is directly discharged into the atmosphere by a fan. The purified exhaust gas meets the requirements of Table 2 of the Comprehensive Emission Standard for Air Pollution GB16297-1996.

scope of application

Suitable for acidic waste gases generated in low concentration, large quantities, or intermittent explosive high concentration working environments, with a wide range of applications; It can be applied to occasions or factory workshops where acidic waste gases are generated, such as metallurgy, chemical engineering, machinery, electroplating, electronic component production, battery life, acid washing operations, laboratory emissions, etc.

characteristic

It can adsorb difficult gases such as nitrogen oxides and purify multiple mixed acid gases simultaneously. The adsorption purification efficiency is high, the temperature adaptability is good, the operating cost is low, and the one-time addition of fillers can meet the long-term operation. The operation, management, and maintenance are simple, and no secondary pollution is generated during operation.

Automated control

This tower can be equipped with automation control devices according to user needs, including gas online analyzers, pressure sensors, differential pressure transmitters, flow sensors, control cabinets, etc., to implement gas online analysis and monitoring, automatic alarm for gas exceeding standards, automatic interlocking of gas flow and pressure transmission with fan operation, automatic digital display and other automation control devices for this tower. Manual, semi-automatic and automatic control can be carried out according to usage requirements.

Adsorption packing replacement

There is a chemical reaction between the adsorption packing and the acidic waste gas, which occurs from the contact surface inward. Therefore, the adsorption efficiency gradually decreases over time. However, replacing the adsorption packing once can generally last for about a year. If the concentration of the waste gas is greater thanIf the concentration is 1000mg/m3 or higher, the service life of the adsorption packing will be correspondingly shortened. The replacement of the adsorption packing will be supplied by our company. The replaced adsorption packing can be disposed of at will without causing secondary pollution.

Contact: Manager Yao mobile phone:18831897799