-
E-mail
413655868@qq.com
-
Phone
13501767698,18017683200
-
Address
No. 290 Chenjian Road, Chenjia Town, Chongming District, Shanghai
Product Categories
Shanghai Qiangshun Machinery Manufacturing Co., Ltd
Shanghai powder tablet press mold manufacturer
NegotiableUpdate on 01/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Shanghai powder tablet press mold manufacturer has decades of experience in the production and manufacturing of stamping dies, which can meet the needs of users in various forms such as circular, irregular, shallow concave, deep concave, oblique edge, split punch, single punch, multi punch, chrome plated, and hard alloy stamping dies.
Product Details
Shanghai powder tablet press mold manufacturerPressing various granular raw materials into circular pieces, suitable for laboratory trial production or small-scale production of various tablets, sugar tablets, calcium tablets, irregular tablets, etc.
Installation of powder tablet press mold:
⑴ Installation of upper punch: Loosen the lower punch fixing screw, turn the handwheel to raise the lower punch core rod to a high position, insert the lower punch rod into the hole of the lower punch core rod (pay attention to aligning the notch slope of the lower punch rod with the lower punch fastening screw and inserting it to the bottom), and then tighten the lower punch fixing screw.
⑵ Install the lower punch: Loosen the upper punch fastening nut, insert the upper punch core rod into the hole of the upper punch core rod, insert it to the bottom, use a wrench to clamp the hexagonal lower part of the upper punch core rod, and tighten the upper punch fastening nut.
⑶Shanghai powder tablet press mold manufacturerInstall the middle mold: Loosen the fixing screws of the middle mold, place the middle mold flat into the hole of the middle mold platform, and punch it down into the hole of the middle mold, press it to the bottom, and then tighten the fixing screws of the middle mold. When placing the middle mold, it is important to keep it flat to avoid getting stuck when tilted and damaging the hole wall.
⑷ Rotate the handwheel by hand to slowly lower the upper punch into the middle mold hole, and observe for any collision or friction. If collision or friction occurs, loosen the fixing screws (two) of the middle mold plate, adjust the position of the fixing of the middle mold plate, so that the upper punch enters the middle mold hole, and then tighten the fixing screws of the middle mold plate. Adjust in this way until there is no collision or friction when the upper punch enters the middle mold, and then the installation is qualified.
Mechanical equipment: Pharmaceutical machinery equipment ZPW21A、ZPW25、ZP31D、35D、37D、39D、41D、ZP31B、ZP35B、37B、39B、41B、ZPSX10、17、21、GZSX26、 32, 40 high-speed series isostatic press and related equipment such as crushing, screening, mixing granulation, drying, screening, etc.
