Supply powder tablet press molds

Supply powder tablet press moldsThe mold compresses various granular raw materials into circular pieces, suitable for laboratory trial production or small-scale production of various tablets, sugar tablets, calcium tablets, shaped tablets, etc.

Installation of powder tablet press mold:

⑴ Installation of upper punch: Loosen the lower punch fixing screw, turn the handwheel to raise the lower punch core rod to a high position, insert the lower punch rod into the hole of the lower punch core rod (pay attention to aligning the notch slope of the lower punch rod with the lower punch fastening screw and inserting it to the bottom), and then tighten the lower punch fixing screw.

⑵ Install the lower punch: Loosen the upper punch fastening nut, insert the upper punch core rod into the hole of the upper punch core rod, insert it to the bottom, use a wrench to clamp the hexagonal lower part of the upper punch core rod, and tighten the upper punch fastening nut.

⑶Supply powder tablet press moldsInstall the middle mold: Loosen the fixing screws of the middle mold, place the middle mold flat into the hole of the middle mold platform, and punch it down into the hole of the middle mold, press it to the bottom, and then tighten the fixing screws of the middle mold. When placing the middle mold, it is important to keep it flat to avoid getting stuck when tilted and damaging the hole wall.

⑷ Rotate the handwheel by hand to slowly lower the upper punch into the middle mold hole, and observe for any collision or friction. If collision or friction occurs, loosen the fixing screws (two) of the middle mold plate, adjust the position of the fixing of the middle mold plate, so that the upper punch enters the middle mold hole, and then tighten the fixing screws of the middle mold plate. Adjust in this way until there is no collision or friction when the upper punch enters the middle mold, and then the installation is qualified.

Shanghai Qiangshun Machine Mold Manufacturing Co., Ltd. is a professional manufacturer of various rotary tablet press molds, pharmaceutical die molds, laboratory tablet press molds, high-speed tablet press molds, flower basket tablet press molds, customized pharmaceutical machine molds, rotary tablet press machines, slot mixers, small and medium-sized equipment, pharmaceutical machine accessories and accessories. For more than 20 years since its establishment, our company has always ensured the needs of our customers with our reputation and product quality.

Qiangshun designers use early drawing techniques to design various types of irregular piece samples for clients. Our products are exported to Hong Kong, Taiwan, Malaysia, Europe and other places. We are currently the largest manufacturer of stamping dies in China and have received high praise from our customers.