Stainless steel platform scale in the batching workshop

Stainless steel platform scale in the batching workshop

The structure is made of all stainless steel material and has been polished and brushed on the surface, with high aesthetics and obvious anti-corrosion and moisture-proof effects. The 45mm ultra-low table height is convenient for weighing on carts such as small cars or hydraulic carts. The scale size can be flexibly customized according to user requirements, and the foldable slope design can be flipped to the upper part of the whole, greatly facilitating transportation and reducing storage space. The overall mobility is high and does not occupy fixed space, making it an ideal choice for users in the chemical and pharmaceutical industries who have high quality requirements for measuring instruments.

Applicable occasions:

The main application is in the industry of trolley or hydraulic vehicle scales that require anti-corrosion and moisture-proof requirements

Features:

Overall framed, low tabletop, with built-in limit and automatic reset function

The scale body is assembled and welded with a dedicated fixture, and the standard configuration is double-sided sloping

Weighing material: patterned steel plate, brushed surface treatment on the weighing platform, outstanding anti-corrosion and moisture-proof effects

Standard equipped with four stainless steel weighing sensors, 150% safe load capacity

Compact structure, stable performance, directly laid on cement ground. Suitable for weighing human powered vehicles, saving time and effort.

The scale body can be customized according to user requirements

Equipped with a dual slope structure, it can be folded during movement, saving transportation space. It is easy to disassemble and transport, and the scale body is easy to move, with accurate measurement and high universality of components.

Range: 0.5T/11T/2T/3T

尺寸： 0.8m×1.0m、1.0m×1.0m、1.2m×1.2m、1.2m×1.5m、1.5m×1.5m

Stainless steel platform scale in the batching workshop

Precautions for use:

1. This product cannot be overloaded and should be weighed specifically for use. Pay attention to the humidity and powder layer in the operating environment;

2. It is prohibited to perform arc welding operations on the weighing platform. If arc welding operations must be performed on the weighing platform. Please note: Disconnect the signal cable from the weighing display controller; The grounding wire for arc welding must be set near the welded area and firmly in contact with the scale body. Sensors must not be used as part of the arc welding circuit;

3. Maintain good weighing habits during use. During the weighing process, try to place the goods in the middle position of the electronic weighing scale, so that the four sensors of the weighing scale can balance the force. Do not frequently weigh in one corner for the sake of convenience, which may cause uneven force on the sensor and affect the service life of the electronic weighing scale;

4. When the weighing display controller is not used for a long time (such as more than a month), it should be powered on and checked according to environmental conditions to avoid moisture or other adverse gas erosion that affects reliability; Electronic buffering should not be left in outdoor environments for too long, especially not exposed to rain; Maintain a dry operating environment;

5. No inductive loads, such as doorbells, shall be connected to the same phase line of the electronic weighing scale;