Three effect evaporator manufacturer

Three effect evaporator manufacturerProduct advantages and benefits

Evaporation equipment unit material: 304 stainless steel equipment is compact, occupies a small area, and can eliminate the need for a cooling system.

Heat source: No need to generate steam, especially suitable for existing factories that require expansion of evaporation equipment to supply steam, with insufficient water supply capacity and insufficient space

Low evaporation temperature: very suitable for low-temperature evaporation below 50 ℃ (especially for thermosensitive materials and medicinal herbs)

Low operating costs: low unit energy consumption

Low operating cost: touch PLC fully automatic control system

The basic principle is to use external driving force (forced circulation pump) to send the raw materials in the continuous casting crystallizer (separation equipment) to the heat exchanger chamber, carry out the heat exchanger, increase the temperature, and then enter the continuous casting crystallizer for circulation. The discharge outlet of the crystallization slurry is located at the bottom of the continuous casting crystallizer (which can be designed to have elution effect), and when the preset solid-liquid value of the crystallization slurry is reached, the raw materials can be discharged.

Three effect evaporator manufacturerProduct Features

1. With a high concentration ratio and a forced circulation system, high viscosity raw materials in liquid form are easier to flow and evaporate, resulting in a shorter concentration time;

2. The design scheme, through simple practical operation, can achieve the actual effect of phase change and integrate into the production and manufacturing of different products;

3. Low volatilization temperature, flexible use of heat generation, and gentle heating of the material liquid, suitable for concentration of thermosensitive raw materials;

4. According to mandatory circulation, the evaporator experiences uniform heat distribution inside the tube, with high thermal conductivity, which can avoid dry wall conditions;

5. The feed liquid enters the separation equipment for secondary separation, improving the actual separation effect and making the entire mechanical operation more flexible;

6. Continuous input and output of raw materials can be carried out, and the material level gauge and required concentration value can be automatically controlled by the system.