UII type air heat exchanger

characteristic:

1.U-II type air heat exchangerIt is a type of heat dissipation pipe that is suitable for both steam heating systems and hot water heating systems. The inlet and outlet joints are on the same side, and the inlet and outlet pipes are connected by U-shaped elbows, which is suitable for

There are certain special requirements for installation, such as one end of the heat dissipation pipe must be against a wall or other obstacles.
2.U-II type air heat exchangerThe finned tubes are all made of φ 16x1.0mm copper tubes wrapped with 10x0.2mm corrugated copper strips, forming a spiral shape. The fin spacing is 3.2mm (R), and the "R" fin spacing is small while the heat dissipation area is large, resulting in the largest heat dissipation

Heat; The 4.2m (M) "M" spacing is relatively large, resulting in lower heat dissipation and air resistance; 6.5mm (T), with the maximum spacing between the "T" type plates, suitable for situations where steam pressure is high and air temperature rise is low.
3.U-II type air heat exchangerThe connection between the finned tube and the inlet and outlet manifold is made by brazing, which requires strict requirements, careful consideration, and fine craftsmanship to ensure excellent heat transfer performance, good anti-corrosion effect, durability, and cost-effectiveness.
After the U-II type air heat exchanger finned tubes are wound, they are all coated with tin alloy on the surface to ensure tight contact between the tubes and fins and achieve aesthetic and anti-corrosion effects. There are various surface tube lengths, tube numbers, row numbers, and fins available

There are various combinations of spacing, with 765 different sizes and specifications.
5.UII type air heat exchangerThe numbering method is:
Model - Row number (spacing code) - Number of surface tubes - Surface tube length (inches)
If two rows are used, with a spacing of 3.2mm, 21 surface tubes, and a tube length of 60 inches, then UII-2 (R) -21-60