Vacuum ultrasonic cleaning machine

Vacuum ultrasonic cleaning machineThe use of vacuum degassing devices such as vacuum generators can reduce the residual dissolved oxygen in various cleaning agents to below 2mg/L. After vacuum degassing treatment, the cleaning agent used for ultrasonic cleaning has improved efficiency and has a significant cleaning effect on complex shapes and small pores.

Cleaning process: During cleaning, the object to be cleaned is first placed into the cleaning solution under normal pressure, and the cleaning solution penetrates into the fine or deep holes of the workpiece. Then, vacuum degassing treatment is carried out. During the process of reducing pressure and vacuuming, the dissolved small bubbles in the cleaning solution are promoted to expand in the fine holes with the decrease of air pressure, and then the dirt is carried out together. Then, under vacuum, the ultrasonic generator is started to use the good cleaning ability of ultrasonic waves in the degassed cleaning solution to remove dirt. Then start the circulation pump to circulate the cleaning solution under vacuum and remove dirt through the filter. To improve the cleaning effect, the cyclic operation of reducing pressure, degassing, and restoring to normal pressure can be repeated to enhance the transmission efficiency of ultrasonic waves and strengthen the peeling effect on dirt

The use of high-frequency ultrasonic cleaning is currently an important method for cleaning super workpieces. Its principle is to use ultrasonic waves to greatly increase the vibration acceleration of the cleaning solution to achieve the cleaning purpose. When a huge vibration acceleration is applied to the workpiece, the dirt particles on its surface are easily peeled off. Due to its minimal damage to workpieces, high-frequency ultrasound is commonly used for cleaning complex workpieces such as semiconductor and liquid crystal display substrates. But if there is a lot of gas dissolved in the cleaning solution, the propagation speed of ultrasound in the cleaning solution will be attenuated, and its cleaning effect cannot be exerted. Therefore, vacuum degassing treatment should also be carried out when using high-frequency ultrasonic cleaning. It can maximize the protection of cleaned medical equipment from damage, clean various stains on surgical machinery and accessories, eliminate the problem of manual cleaning, and protect staff from contamination and infection. It is a hospital equipment.

Vacuum ultrasonic cleaning machineParameters of:

Capacity 52L

Ultrasonic power 1000W

Ultrasonic frequency 40KHZ

Heating power 1000W

Equipped with stainless steel mesh basket

Equipped with a vacuum system