Wet dry powder mixed granulation catalyst mixed material dry granulation machine

Scope of application:

The material contact parts of this machine are made of stainless steel, and the mixing shaft is equipped with a sealing device, which can effectively prevent material mixing and ensure the service life of bearings and various transmission components.

The vertical high-speed mixer is a high-speed and efficient mixing equipment specially developed for powder material mixing, which solves the process problem of uniformly mixing various powder raw materials with water into wet materials in industries such as food and pharmaceuticals for many years. Previously, most manufacturers used mixing equipment such as trough mixers, V-shaped mixers, two-dimensional mixers, and three-dimensional mixers, but they all had common problems such as long mixing time, uneven mixing, and a large number of small clusters and pieces. The products produced had color differences, different flavors, and varying ingredient contents, resulting in unstable product quality and unattractive appearance. It is an efficient equipment that mixes different powdered materials into granules in one process.1、 Mix evenly, there are no small clumps or pieces found at all; 2、 Short mixing time, only 3 times are needed to mix 150 kilograms of powder each time-5minute; 3、 Adding and discharging materials is very convenient. When adding materials, add the raw materials, small ingredients, and water at once, then cover the lid and start stirring according to the set time. When discharging materials, simply remove the plug board, turn on the machine or jog it to release the materials. This is both simple and hygienic in operation, without the need to touch the raw materials with hands; 4、 Cleaning is simple. Simply add water to the hopper, turn on the machine, and then drain the water to clean it thoroughly; 5、 The sealing structure of the vertical high-speed mixer has been carefully designed, with reliable sealing performance and easy maintenance and disassembly. All gears have undergone heat treatment, resulting in a long service life.
Features of the equipment:

Utilize the centrifugal force generated by the vertical high-speed rotating blades installed at the bottom of the machine body and apply it to the material, forming a vortex shape with the outer periphery rolling upwards and the center concave downwards, to fully mix and stir the material inside, outside, upper, and lower layers;

Using the high-speed crushing blade installed on the side wall of the machine, the material rolling up from the outer ring is crushed, while also acting as a disturbance, increasing the relative motion between the materials and improving the mixing effect;

Due to the combined action of the two types of blades mentioned above, the material can be fully and uniformly mixed in a relatively short period of time, and its efficiency is comparable to other types of mixers in China;

◆ Mixing bin, quick material release, easy to clean;

The material contact parts of the machine are made of stainless steel, and there will be no material volatilization, deterioration, or loss during the mixing process, ensuring the process ratio requirements;

This machine is suitable for mixing dry and wet materials of different proportions, especially for mixing and stirring various complex materials such as chicken essence, pharmaceutical granules, beverage granules, etc.　
working principle:

　　The vertical high-speed mixer consists of bottom feeding blade slurry and high-speed crushing blade slurry. The feeding blade slurry continuously feeds the bottom material upwards along the cylinder wall. The material sent by high-speed crushing blade slurryCrush and circulate the material to form a vortex, achieving the goal of mixing the material evenly in a short period of time.
1. Due to the centrifugal force, the bottom feeding blade slurry of the vertical high-speed mixer continuously feeds the bottom material upwards along the cylinder wall, while the upper material falls downwards from the center, causing the material to circulate and form a vortex.
2. The high-speed crushing blade slurry crushes the block shaped materials sent by the feeding blade slurry.
3. Due to the high-speed rotation of the two types of blade pulp mentioned above, it is possible to achieve uniform mixing of materials in a relatively short period of time. The mixing speed and uniform speed cannot be achieved by various domestic mixers, and the mixed materials have no particles in between, resulting in a uniform mixing speed;
4. Open the discharge valve, the discharge speed is fast, and the equipment is easy to clean
5. The material contact points of the mixer are made of stainless steel, which will not cause material volatilization, deterioration, or loss during the mixing process.