ZEISS PRISMO Bridge Coordinate Measuring Machine
1) The acceptance test probe has a length of 60 mm and a probe tip diameter of 8 mm, which is also effective for these probes (diameter 3x33 mm, medium 5x50mm, and diameter 12x92mm for PRISMO ultra)
2) Measurement length L unit: mm
3) Measure roundness on a 50mm diameter ring gauge at a measurement speed of 5mm/sec and filter with a power of 50 W/U
4) The measurement position is located near the calibration position
5) Precision combined with PRISMO ultra reference standard and reference sphere bending correction
6) Within the measurement range of 800/1000/600
7) Within the measurement range of 800/1200/600
1) The acceptance test probe has a length of 60 mm and a probe tip diameter of 8 mm, which is also effective for these probes (diameter 3x33 mm, diameter 5x50mm, diameter 8 x 114 mm, and diameter 12x92 mm) used for PRISMO navigator (in conjunction with CMM reference standards).
2) Measurement length L unit: mm
3) 1.2+L/350 at 18 ° C -22 ° C
4) ZEISS PRISMO 10 (Y>2400) at 18 ° C-24 ° C
5) Measure roundness on a 50mm diameter ring gauge at a measurement speed of 5mm/sec and filter with a power of 50 W/U
6) The measurement position is located near the calibration position
7) Suitable for ZEISS VAST XT gold
1) The specifications of ZEISS VAST XXT, TL1 : I=50, dia3 mm; TL3: I=60, dia. 5 mm; TL4: I=125, dia3mm
2) The unit for measuring length L is mm. For RDS, the measurement angle is A=0 ° and B=0 °
3) ZEISS PRISMO 10 (Y>2400) at 18 ° C-24 ° C
4) The scanning speed in roundness measurement is 5mm/s, and the filtering is 50 UPR
5) When using an optical probe, a contact probe (such as VAST XXT) is required for calibration
6) All specifications measured using ZEISS ViScan 1x lens
7) The detection error at the center of the measurement range on a suitable sphere (diameter 30 mm) with a dull surface. P[Form.Sph.D95 %:Tr:ODS]， Working distance information based on the center of the measurement range
8) Laser grade ZM: The laser beam that can be touched is within the visible spectrum range. As long as the burst time is short (0.25 seconds) and the optical instrument does not reduce the cross-section, it is safe for the eyes (such as magnifying glasses, lens elements, telescopes).
9) Using ZEISS PRISMO ultra for 68 seconds
1) Before using an optical measuring needle, it is necessary to calibrate it in conjunction with a contact measuring needle (such as VAST XXT)
2) Only applicable to PRISMO - not applicable to ZEISS PRISMO ultra.
3) ZEISS VAST XXT: depends on the module (TL1, TL3, or TL4).
4) It may be useful to limit the parameters of probe configuration depending on the application.
1) According to the properties of the foundation, there may be deviations from the given values
2) Optional base with a height of 830mm. Total height increased by 230mm
3) Optional Workpiece Load Capacity Enhancement Option (NSP)
4) The specifications are applicable to ZEISS VAST gold with a probe length of 60 mm and a tip diameter of 8 mm
5) Specification for ZEISS VAST gold without adapter board
6) 5, 8 or 10 mm depending on dry installation (installation or gradual insertion of steel plate). More information can be found in the installation manual.
Optional Coordinate Measuring Machines
Bridge type coordinate measuring machine
ZEISS SPECTRUM Scanning Measurement Platform
ZEISS PRISMO
ZEISS ACCURA
ZEISS MICURA Small Size * Precision
ZEISS CONTURA Compact
ZEISS XENOS
ZEISS SPECTRUM Mobile
ZEISS MICURA Mobile
ZEISS CONTURA
ZEISS PRISMO
ZEISS CONTURAZEISS ACCURA
Composite three coordinate system
ZEISS O-INSPECT322
ZEISS O-INSPECT543
ZEISS O-INSPECT863
Large gantry high-precision coordinate measuring machine
ZEISS MMZ G
ZEISS MMZ M
ZEISS MMZ T
Production of Coordinate Measuring Machines
ZEISS CenterMax
ZEISS GageMax
ZEISS DuraMax
Cantilever Coordinate Measuring Machine
ZEISS CALENO
ZEISS PRO/PRO T
ZEISS CARMET
Computerized tomography measuring machine
ZEISS METROTOM 6 scout
ZEISS Xradia610 & 620 Versa
ZEISS Xradia 800 Ultra
ZEISS Xradia 810 Ultra
ZEISS Xradia Context microCT
ZEISS Xradia 410 Versa
ZEISS Xradia 510 Versa
ZEISS SRE MAXX-ray shielding cabinet
ZEISS METROTOM 800
ZEISS METROTOM 1500
Production process control and inspection procedures
ZEISS VoluMax
ZEISS SurfMax
Online measurement robot
Hybrid measuring station
Offline robot workstation
2D measurement and testing station
Robot guidance
Zeiss Measurement Solutions
Wittmann
Nidec Motors
Henschel
GRASS
Cummins
LT Ultra
SABS
Xiongbang Die Casting
Volkswagen
GM
Bosch
IAC
Agusta Westland
Andrew Tool
Jamco Aeropspace
Three-M Tool
Moventas
Pietro Rosa
PMT India
Rochester Precision Optics
Schwan Cosmetics
Agfa Healthcare
CardioBridge
MeadWestvaco
Braun
starlim//sterner
