The fast high and low temperature impact test chamber is a test chamber that requires rapid impact and ultra fast temperature conversion, so the cooling power will be much higher than that of ordinary high and low temperature test chambers. The air-cooled cooling system may not be able to meet this requirement, so manufacturers usually configure it as a water-cooled cooling system. So a water-cooled refrigeration system must be installed with a water tower to operate. So customers are considering the size and placement of the equipment, and please also pay attention to the size of the water tower to arrange the reserved space for installation. Due to the numerous models and temperature ranges of rapid high and low temperature impact test chambers, which can affect the size of the water tower, we can only provide you with commonly used or standard sizes. The commonly used water towers currently include 10 tons, 15 tons, 20 tons, 25 tons, 30 tons, and 35 tons.

The corresponding size is as follows:

10 tons, width 1200mm * height 1800mm;

15 tons, width 1200mm * height 2000mm;

20 tons, width 1500mm * height 2100mm;

25 tons, width 1500mm * height 2200mm;

30 tons, width 1600mm * height 2300mm;

35 tons, width 1800mm * height 2300mm;

Note: The above dimensions are for reference only. There may be slight deviations in actual products or different brands of water towers. It is recommended to leave as much space as possible when reserving installation space. The above water towers are not only used in rapid high and low temperature impact test chambers, but also in some non-standard large high and low temperature test chambers, constant temperature and humidity test chambers, constant temperature and humidity test laboratories and other high-power equipment. You can choose the corresponding size according to the provided water tower size.