1、 Preparation work
Before using a dry heat sterilization cabinet, preparations must be made:
1. Cleaning: Clean the items that need to be operated to make their surfaces clean and free of residue, and dry the surface moisture with clean gauze.
2. Packaging: Pack the items that need to be sterilized properly and seal them tightly.
3. Full load: Place the items strictly according to the loading method specified in the sterilization cabinet.
4. Cleaning: Clean the interior of the dry heat sterilization cabinet and remove any debris inside.
2、 Operation steps
1. Open the door of the dry heat sterilization cabinet and place the items that need to be sterilized inside the cabinet.
2. Choose sterilization program: Select the appropriate sterilization program based on the different items that need to be sterilized. You can refer to the user manual of the sterilization cabinet.
3. Set sterilization program: Based on the selected sterilization program, set parameters such as temperature, time, and heating and cooling rate one by one.
4. Start the dry heat sterilization cabinet: After setting the sterilization program, start the dry heat sterilization cabinet to start working.
5. Waiting to cut off power: When the sterilization program is completed, the dry heat sterilization cabinet will automatically shut down or manually cut off the power.
6. Connect the power supply, open the sterilization cabinet door, and remove the sterilized items.
7. After the work is completed, clean the inside of the sterilization cabinet in a timely manner.
3、 Precautions
1. Operators must be familiar with the usage and operating procedures of the dry heat sterilization cabinet, and ensure that they have carefully read the product manual.
2. The operator must make the correct selection of the type of item to be processed.
3. When opening the oven door of the dry heat sterilization cabinet, pay attention to the high temperature and hot air inside the oven.
4. Operators should keep the interior of the dry heat sterilization cabinet clean to ensure the service life and sterilization effect of the equipment.
5. After the operation is completed, the sterilization cabinet power grid should be turned off to keep the equipment dry and clean.