The solid-liquid separator mainly has the following process characteristics:

1. Good treatment effect: The removal rate of pollutants is 40-99% for COD, 30-60% for ammonia nitrogen, and 80-99% for decolorization,

2. Fast processing speed: The entire coagulation reaction and solid-liquid separation process generally only takes about 3 minutes.

3. Small footprint: The entire unit can be miniaturized to the limit, such as a 100m3/h unit that occupies only 45m2.

Compared with traditional biochemical processes, it occupies only about 1/10 of its area.

4. Large water treatment capacity: Due to the fast flocculation reaction and solid-liquid separation speed (about 3 minutes) of this equipment, parallel connection can be used to solve the problem of large water treatment capacity in sewage plants (stations).

5. Strong maneuverability: It can be made into a fixed type, as well as a vehicle mounted or ship mounted type for mobile processing, and can be used simply by connecting to a power source.

Can be used for oil drilling, river and lake dredging, municipal engineering, construction site sites, etc.

6. The system does not require backwashing: there is no problem of any form of blockage or retention during the entire process, and there is no problem of water flow being obstructed or blocked, so backwashing is not necessary. Just flush out the remaining reaction solution and mud with clean water before stopping the machine.

7. High degree of automation and easy management: When the equipment is in operation, it only needs continuous water and power supply, and can automatically operate with Yao, reaction, and separation without supervision. It can also be controlled by frequency conversion and managed by personnel. Yao only needs to be added once every hour according to time periods 8, 12, and 24.

8. Good safety performance: The device is equipped with an automatic alarm function. If a certain agent is interrupted or the rotating part malfunctions during operation, it can alarm and stop the machine, avoiding substandard handling or mechanical accidents. After the fault is eliminated, the device can be started again.

9. Low maintenance rate: The disc speed of this equipment is only 1rd/min, so there are few failures, and vulnerable parts can be replaced regularly.

10. Short construction period: The equipment manufacturing period is 30-45 days, the installation time is 2-3 days, and the debugging time is only a few hours.

11. Low operating cost: The operating cost is very low, generally 1/3 to 1/2 of traditional processes.

12. Cost saving estimate: Compared with traditional processes, this process equipment saves a large number of civil structures and equipment such as reaction tanks, settling tanks, filtration tanks (tanks), sludge concentration tanks (machines), dewatering machines, filter presses, etc. Generally speaking, the cost of transportation is only half or less of traditional processes.