1、 Operating procedures for screw belt mixer
1. Preparation before operation: Before operating the screw belt mixer, the necessary preparations include:
(1) Confirm that there are no foreign objects inside the mixing tank;
(2) Requirements for disassembly and installation of screw straps;
(3) Electrical wiring inspection of the mixer;
(4) Confirm the lubrication status and cleanliness of the transmission system chains and bearings.
2. When starting to operate the screw belt mixer, the following steps should be followed:
(1) Start the transmission motor first, and then start the hybrid motor;
(2) Operators should always pay attention to their work situation and ensure safety;
(3) During the mixing process, if there are any abnormal or dangerous situations, the machine should be stopped urgently and checked.
3. After the operation of the screw belt mixer is completed, the following procedures should be followed:
(1) Cut off the power first and stop the motor from running;
(2) Thoroughly clean the residual materials in the mixing tank;
(3) Clean and disassemble components such as screw belts and mixing tanks.
2、 Maintenance regulations for screw belt mixer
1. Seasonal maintenance should be carried out at least once to check the condition and wear of equipment, prevent machine degradation due to harsh environments, and prevent problems that may persist throughout the entire production cycle.
2. Regular lubrication requires frequent lubrication of the screw belt mixer to maintain its operational status. Like other machines, the screw belt mixer also experiences wear and tear during operation, requiring oiling and lubrication.
3. As the service life increases, the system of the screw belt mixer needs to be adjusted at any time. To ensure smooth and unobstructed operation, and even mixing of processed materials.
4. Cleaning stains and dirt is built inside the device and is usually only detected when they first appear. If such a problem is not solved, it will affect the normal operation of the machine, contaminate the output mixed materials, and affect the mixing effect.