Welcome Customer !

Membership

Help

Jiangyin Zhongkai Pharmaceutical Machinery Manufacturing Co., Ltd
Custom manufacturer

Main Products:

pharmamach>Article

Jiangyin Zhongkai Pharmaceutical Machinery Manufacturing Co., Ltd

  • E-mail

    535722834@qq.com

  • Phone

    13812119616

  • Address

    No. 65 Zhennan Road, Zhutang Town, Jiangyin City

Contact Now
The principle and characteristics of two-dimensional motion mixer
Date: 2021-06-29Read: 6
A two-dimensional motion mixer refers to a mixer in which the drum can move in two directions simultaneously. The two directions of motion are the rotation of the drum, which swings with the swing frame. The mixed materials undergo left and right back and forth mixing movements with the rotation, flipping, and mixing of the drum, while also swinging with the drum. Under the combined action of these two movements, the materials are fully mixed in a short period of time.
The working principle of a two-dimensional motion mixer: The two-dimensional mixer consists of three main parts: a drum, a swing frame, and a frame. The drum is mounted on the swing frame, supported by four rollers and axially positioned by two gear wheels. Among the four supporting rollers, two transmission wheels are dragged by the rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components, allowing the rotating drum to participate in swinging while rotating, allowing the materials in the drum to be fully mixed.
The two-dimensional motion mixer mainly has the following characteristics:
1. The second rotation adopts a cycloidal pinwheel reducer or a worm gear reducer. Compared with traditional mixers, it has no material accumulation at the bottom, no pollution, easy flushing, and meets GMP requirements.
2. During operation, under the dual action of the rotating mechanism and the swinging mechanism, the loading cylinder rotates while also undergoing swinging motion, allowing the materials inside the cylinder to be fully mixed.
3. The equipment can be equipped with an automatic vacuum feeding machine and interface, which facilitates feeding and shortens operation time. High efficiency and low cost
4. Two dimensional motion mixer: simple structure, low failure rate, stable operation, safe operation, no noise, easy to clean, in compliance with GMP requirements.
5. The volume is much smaller than the normal standard, occupies less space, and has powerful functions.