The rotary granulator is made of stainless steel, with a beautiful appearance, reasonable structure, high granulation forming rate, beautiful particles, automatic discharge, avoiding particle damage caused by manual discharge, and suitable for flow operation. By using gears to change speed and direction, the grinding blade and the pressing blade rotate in opposite directions. The pressing blade presses down the material through a slope, and the grinding blade squeezes the material out of the sieve cylinder through a circular arc under the action of centrifugal force, thereby obtaining the desired particles.

The main features of the rotary granulator are:

1. Low noise, high output, easy operation and maintenance. The screen mesh is easy to assemble and disassemble, and the tightness can be adjusted appropriately. The drum is easy to disassemble. Easy to clean. The rotating drum is made of stainless steel to ensure the quality, cleanliness, and colorfastness of the processed material. The speed can be adjusted.

2. Material preparation: Dry powder should be mixed evenly with an appropriate amount of water. Wet materials can be dried appropriately. The material is in the form of blocks and should not be processed.

3. Machine preparation: Remove the glass cover of the discharge cylinder, replace the appropriate sieve, adjust the prick wheel in the handwheel to the appropriate position, run the machine empty for 1-2 minutes, and then start the machine again if there are no abnormalities.

4. Usage: Start the machine, pour the mixture into the hopper, and use the swinging effect of the rotating drum to squeeze the material through the sieve to form particles.