The 30B crusher is suitable for industries such as pharmaceuticals, chemicals, metallurgy, food, and construction. Processing hard and difficult to crush materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc., can also be used as supporting equipment for the pre processing of ultrafine crushers. Its powder collection room adopts a fully enclosed soundproofing structure, which can effectively reduce working noise. The machine is equipped with a cooling device to lower the temperature and ensure smoother operation. The motor speed of this machine is 5000 revolutions per minute. This machine is made of Icr18Ni9Ti stainless steel material, which has strong wear and corrosion resistance characteristics and is suitable for processing and corrosive materials. This machine adopts the impact crushing method. After the material enters the crushing chamber, it is impacted by six high-speed rotating movable hammers, and is crushed by the collision between the gear ring and the material. With the help of airflow, the crushed material enters the powder bag through the sieve holes without leaving any residue. It has the advantages of high efficiency, low noise, reliable work performance and product quality, safe operation, low drug hygiene and loss.

The material of the 30B crusher is fed into the crushing chamber by the feeding hopper, and through the impact of the blade and the blade seat, the rotating blade and the fixed blade simultaneously shear and crush. Due to the centrifugal force of rotation, the material automatically flows out from the outlet.

Working principle of 30B crusher:

This unit is made of 304 stainless steel both inside and outside, and the inner wall of the casing is machined to achieve a smooth and flat surface. The main shaft of this machine is equipped with a movable gear plate, which has three rings of movable teeth. The door is equipped with a fixed gear plate, and the fixed gear plate is equipped with two rings of fixed gear rings with strip steel teeth. The movable teeth on the movable gear plate are arranged in a staggered manner with the fixed gear ring. When the spindle runs at high speed, the movable gear plate also runs simultaneously, and the material is thrown into the gap between the heads. Under the comprehensive effects of mutual impact, shear, friction, etc. between materials and teeth or materials, pulverization is achieved. After being sieved through a screen, the finished product is discharged from the crushing chamber through the screen into a cyclone separator for separation and collection. The exhaust gas is filtered and collected by a high-pressure pulse bag filter, while the coarse material continues to be crushed. The fineness of crushing can be adjusted using a sieve. There is no dust flying during the production process, improving working conditions and increasing the utilization rate of finished products. This machine has a simple structure, is sturdy and durable, has high output, and runs smoothly. Make the production of drugs, food, chemicals, etc. more in line with national standards; Meets the requirements of GMP for drug production. Suitable for the pharmaceutical, chemical, pesticide, food, and grain industries, with a wide range of applications.

30B crusher operation and precautions:

1. Before use, check whether all fasteners of the machine are tightened and whether the belt is tensioned.

2. The direction of spindle operation must conform to the arrow direction indicated on the protective cover, otherwise it will damage the machine and may cause personal injury.

3. Check if the electrical appliances are complete.

4. Check if there are any hard objects such as metal in the crushing room of the machine, otherwise it may damage the cutting tools and affect the operation of the machine.

5. Before crushing, the purity of the material must be checked, and no metal or hard impurities are allowed to mix in, in order to avoid damaging the cutting tool or causing accidents such as combustion.

6. The oil cup on the machine should be regularly filled with lubricating oil to ensure normal operation of the machine.

7. Stop adding materials before stopping the machine. If not in use, remove any remaining debris inside the machine.

8. Regularly check whether the cutting tools and mesh are damaged, and replace them immediately if they are damaged.

9. There may be slight vibrations during use, so be sure to tighten the handle connecting the hood to avoid accidents.